lkml.org 
[lkml]   [2020]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 7/7] drm/mediatek: mtk_dsi: Create connector for bridges
Hi Enric,

On Thu, Apr 16, 2020 at 08:35:26PM +0300, Laurent Pinchart wrote:
> On Thu, Apr 16, 2020 at 05:57:19PM +0200, Enric Balletbo i Serra wrote:
> > Use the drm_bridge_connector helper to create a connector for pipelines
> > that use drm_bridge. This allows splitting connector operations across
> > multiple bridges when necessary, instead of having the last bridge in
> > the chain creating the connector and handling all connector operations
> > internally.
>
> That's the right direction, but this should be done in the mtk display
> controller driver core, not in here. I'm OK with the code being here as
> an interim measure if needed to move forward, but that should then be
> temporary only.

I forgot to mention that the drm_encoder should also move out of the
bridge driver to the display controller driver.

> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > ---
> >
> > Changes in v2: None
> >
> > drivers/gpu/drm/mediatek/mtk_dsi.c | 14 +++++++++++++-
> > 1 file changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > index 44718fa3d1ca..2f8876c32864 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> > @@ -17,6 +17,7 @@
> >
> > #include <drm/drm_atomic_helper.h>
> > #include <drm/drm_bridge.h>
> > +#include <drm/drm_bridge_connector.h>
> > #include <drm/drm_mipi_dsi.h>
> > #include <drm/drm_of.h>
> > #include <drm/drm_panel.h>
> > @@ -184,6 +185,7 @@ struct mtk_dsi {
> > struct drm_bridge bridge;
> > struct drm_bridge *panel_bridge;
> > struct drm_bridge *next_bridge;
> > + struct drm_connector *connector;
> > struct phy *phy;
> >
> > void __iomem *regs;
> > @@ -983,10 +985,19 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
> > */
> > dsi->encoder.possible_crtcs = 1;
> >
> > - ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
> > + ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL,
> > + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> > if (ret)
> > goto err_cleanup_encoder;
> >
> > + dsi->connector = drm_bridge_connector_init(drm, &dsi->encoder);
> > + if (IS_ERR(dsi->connector)) {
> > + DRM_ERROR("Unable to create bridge connector\n");
> > + ret = PTR_ERR(dsi->connector);
> > + goto err_cleanup_encoder;
> > + }
> > + drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
> > +
> > return 0;
> >
> > err_cleanup_encoder:
> > @@ -1144,6 +1155,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> >
> > dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
> > dsi->bridge.of_node = dev->of_node;
> > + dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
>
> I think this line belongs to the patch that adds drm_bridge support to
> this driver.
>
> >
> > drm_bridge_add(&dsi->bridge);
> >

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-04-16 19:38    [W:0.062 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site