lkml.org 
[lkml]   [2020]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 1/1] i2c: iproc: generate stop event for slave writes
On Wed, Apr 15, 2020 at 5:59 PM Wolfram Sang <wsa@the-dreams.de> wrote:
>
> On Sun, Mar 22, 2020 at 11:50:19PM +0530, Rayagonda Kokatanur wrote:
> > When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP
> > event to i2c_client.
> >
> > Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
> > Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
>
> Just to make sure: That means the HW has already detected a STOP
> condition on the bus?
Yes.
>
> > ---
> > drivers/i2c/busses/i2c-bcm-iproc.c | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
> > index 30efb7913b2e..b58224b7ba79 100644
> > --- a/drivers/i2c/busses/i2c-bcm-iproc.c
> > +++ b/drivers/i2c/busses/i2c-bcm-iproc.c
> > @@ -360,6 +360,9 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
> > value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
> > i2c_slave_event(iproc_i2c->slave,
> > I2C_SLAVE_WRITE_RECEIVED, &value);
> > + if (rx_status == I2C_SLAVE_RX_END)
> > + i2c_slave_event(iproc_i2c->slave,
> > + I2C_SLAVE_STOP, &value);
> > }
> > } else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
> > /* Master read other than start */
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2020-04-16 06:47    [W:0.068 / U:2.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site