lkml.org 
[lkml]   [2020]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/3] iio: DAC extension for ltc2634-12/10/8
From
Date
Uwe,

On 15/4/2020 3:00 pm, Uwe Kleine-König wrote:
> On Wed, Apr 15, 2020 at 07:56:03AM +0800, Chris Ruehl wrote:
>> This patch add support for Analog Devices (Linear Technology)
>> LTC2634 Quad 12-/10-/8-Bit Rail-to-Rail DAC.
>> The SPI functionality based on them from LTC2632 therefor
>> add the definitions only and update the Kconfig.
>>
>> V2:
>> Send the documentation fix in a extra patch
>> Kconfig simplify the driver description, details to the help text
>> ltc2632.txt add to this patch-set (prepare to convert to yaml)
>>
>> V3:
>> Consistens decimal separator in help text
>
> The description about how the patch evolves usually goes below the ---
> and S-o-b area. This way it doesn't make it into the commit history.
>>
>> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
>> ---
>> .../devicetree/bindings/iio/dac/ltc2632.txt | 8 ++-
>> drivers/iio/dac/Kconfig | 6 +-
>> drivers/iio/dac/ltc2632.c | 60 +++++++++++++++++++
>> 3 files changed, 70 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
>> index 338c3220f01a..1ab9570cf219 100644
>> --- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
>> +++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
>> @@ -1,4 +1,4 @@
>> -Linear Technology LTC2632/2636 DAC
>> +Linear Technology LTC2632/2634/2636 DAC
>>
>> Required properties:
>> - compatible: Has to contain one of the following:
>> @@ -8,6 +8,12 @@ Required properties:
>> lltc,ltc2632-h12
>> lltc,ltc2632-h10
>> lltc,ltc2632-h8
>> + lltc,ltc2634-l12
>> + lltc,ltc2634-l10
>> + lltc,ltc2634-l8
>> + lltc,ltc2634-h12
>> + lltc,ltc2634-h10
>> + lltc,ltc2634-h8
>> lltc,ltc2636-l12
>> lltc,ltc2636-l10
>> lltc,ltc2636-l8
>> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
>> index 93744011b63f..aee13ced6ddf 100644
>> --- a/drivers/iio/dac/Kconfig
>> +++ b/drivers/iio/dac/Kconfig
>> @@ -279,12 +279,12 @@ config LTC1660
>> module will be called ltc1660.
>>
>> config LTC2632
>> - tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
>> + tristate "Linear Technology LTC2632-12/10/8 and similar DAC spi driver"
>> depends on SPI
>> help
>> Say yes here to build support for Linear Technology
>> - LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
>> - LTC2636-8 converters (DAC).
>> + LTC2632, LTC2634 and LTC2636 DAC resolution 12/10/8 bit
>> + low 0-2.5V and high 0-4.096V range converters.
>>
>
> The naming pattern seems to be:
>
> LTC263ab-cc
>
> with:
>
> a = 2 -> 2 channels
> a = 4 -> 4 channels
> a = 6 -> 8 channels
>
> b = L -> Vref = 2.5V
> b = H -> Vref = 4.096V
>
> cc = 8 -> 8 bit precision
> cc = 10 -> 10 bit precision
> cc = 12 -> 12 bit precision
>
> Would it make sense to document this somewhere?
>
> But as this is (somewhat) orthogonal to this patch:
>
> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
>
> Best regards
> Uwe
>

General I think that is a good solution to be precise in the description.
Update the device-tree lltc,ltc2632.yaml with this kind of
information, its logically the better place - IMHO

Kind regards
Chris

--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521

Disclaimer: https://www.gtsys.com.hk/email/classified.html

\
 
 \ /
  Last update: 2020-04-15 10:52    [W:0.045 / U:2.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site