lkml.org 
[lkml]   [2020]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [EXT] Re: [RFC PATCH 1/4] bus: fsl-mc: add custom .dma_configure implementation
On Wed, Apr 15, 2020 at 05:42:03AM +0000, Makarand Pawagi wrote:
>
>
> > -----Original Message-----
> > From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > Sent: Tuesday, April 14, 2020 8:02 PM
> > To: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> > Cc: linux-kernel@vger.kernel.org; iommu@lists.linux-foundation.org; linux-arm-
> > kernel@lists.infradead.org; linux-acpi@vger.kernel.org;
> > robin.murphy@arm.com; ard.biesheuvel@linaro.org; Ioana Ciornei
> > <ioana.ciornei@nxp.com>; Diana Madalina Craciun (OSS)
> > <diana.craciun@oss.nxp.com>; maz@kernel.org; jon@solid-run.com; Pankaj
> > Bansal <pankaj.bansal@nxp.com>; Makarand Pawagi
> > <makarand.pawagi@nxp.com>; Calvin Johnson <calvin.johnson@nxp.com>;
> > Varun Sethi <V.Sethi@nxp.com>; Cristi Sovaiala <cristian.sovaiala@nxp.com>;
> > Stuart.Yoder@arm.com; jeremy.linton@arm.com; joro@8bytes.org;
> > tglx@linutronix.de; jason@lakedaemon.net
> > Subject: [EXT] Re: [RFC PATCH 1/4] bus: fsl-mc: add custom .dma_configure
> > implementation
> >
> > Caution: EXT Email
> >
> > On Wed, Mar 25, 2020 at 06:48:55PM +0200, Laurentiu Tudor wrote:
> > > Hi Lorenzo,
> > >
> > > On 3/25/2020 2:51 PM, Lorenzo Pieralisi wrote:
> > > > On Thu, Feb 27, 2020 at 12:05:39PM +0200, laurentiu.tudor@nxp.com wrote:
> > > >> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> > > >>
> > > >> The devices on this bus are not discovered by way of device tree
> > > >> but by queries to the firmware. It makes little sense to trick the
> > > >> generic of layer into thinking that these devices are of related so
> > > >> that we can get our dma configuration. Instead of doing that, add
> > > >> our custom dma configuration implementation.
> > > >>
> > > >> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> > > >> ---
> > > >> drivers/bus/fsl-mc/fsl-mc-bus.c | 31
> > > >> ++++++++++++++++++++++++++++++-
> > > >> 1 file changed, 30 insertions(+), 1 deletion(-)
> > > >>
> > > >> diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c
> > > >> b/drivers/bus/fsl-mc/fsl-mc-bus.c index 36eb25f82c8e..eafaa0e0b906
> > > >> 100644
> > > >> --- a/drivers/bus/fsl-mc/fsl-mc-bus.c
> > > >> +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
> > > >> @@ -132,11 +132,40 @@ static int fsl_mc_bus_uevent(struct device
> > > >> *dev, struct kobj_uevent_env *env) static int
> > > >> fsl_mc_dma_configure(struct device *dev) {
> > > >> struct device *dma_dev = dev;
> > > >> + struct iommu_fwspec *fwspec;
> > > >> + const struct iommu_ops *iommu_ops; struct fsl_mc_device *mc_dev
> > > >> + = to_fsl_mc_device(dev); int ret;
> > > >> + u32 icid;
> > > >>
> > > >> while (dev_is_fsl_mc(dma_dev))
> > > >> dma_dev = dma_dev->parent;
> > > >>
> > > >> - return of_dma_configure(dev, dma_dev->of_node, 0);
> > > >> + fwspec = dev_iommu_fwspec_get(dma_dev); if (!fwspec)
> > > >> + return -ENODEV;
> > > >> + iommu_ops = iommu_ops_from_fwnode(fwspec->iommu_fwnode);
> > > >> + if (!iommu_ops)
> > > >> + return -ENODEV;
> > > >> +
> > > >> + ret = iommu_fwspec_init(dev, fwspec->iommu_fwnode, iommu_ops);
> > > >> + if (ret)
> > > >> + return ret;
> > > >> +
> > > >> + icid = mc_dev->icid;
> > > >> + ret = iommu_fwspec_add_ids(dev, &icid, 1);
> > > >
> > > > I see. So with this patch we would use the MC named component only
> > > > to retrieve the iommu_ops
> > >
> > > Right. I'd also add that the implementation tries to follow the
> > > existing standard .dma_configure implementations, e.g.
> > > of_dma_configure + of_iommu_configure. I'd also note that similarly to
> > > the ACPI case, this MC FW device is probed as a platform device in the
> > > DT scenario, binding here [1].
> > > A similar approach is used for the retrieval of the msi irq domain,
> > > see following patch.
> > >
> > > > - the streamid are injected directly here bypassing OF/IORT bindings
> > translations altogether.
> > >
> > > Actually I've submitted a v2 [2] that calls into .of_xlate() to allow
> > > the smmu driver to do some processing on the raw streamid coming from
> > > the firmware. I have not yet tested this with ACPI but expect it to
> > > work, however, it's debatable how valid is this approach in the
> > > context of ACPI.
> >
> > Actually, what I think you need is of_map_rid() (and an IORT equivalent, that I
> > am going to write - generalizing iort_msi_map_rid()).
> >
>
> That would help.
>
> > Would that be enough to enable IORT "normal" mappings in the MC bus named
> > components ?
> >
>
> But still the question remain unanswered that how we are going to represent MC? As Platform device with single ID mapping flag?

No, "normal" mappings, that's what I wrote above and it is not a
platform device it is a named component in ACPI/IORT terms.

Thanks,
Lorenzo

\
 
 \ /
  Last update: 2020-04-15 17:44    [W:0.099 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site