Messages in this thread | | | Date | Tue, 14 Apr 2020 14:20:18 +0100 | From | Marc Zyngier <> | Subject | Re: [PATCH] irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock order |
| |
On Tue, 7 Apr 2020 15:46:58 +0100 Marc Zyngier <maz@kernel.org> wrote:
+Jerome, Martin,
> Running a lockedp-enabled kernel on a vim3l board (Amlogic SM1) > leads to the following splat: > > [ 13.557138] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected > [ 13.587485] ip/456 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: > [ 13.625922] ffff000059908cf0 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq+0xf8/0x8d8 > [ 13.632273] which would create a new lock dependency: > [ 13.637272] (&irq_desc_lock_class){-.-.}-{2:2} -> (&ctl->lock){+.+.}-{2:2} > [ 13.644209] > [ 13.644209] but this new dependency connects a HARDIRQ-irq-safe lock: > [ 13.654122] (&irq_desc_lock_class){-.-.}-{2:2} > [ 13.654125] > [ 13.654125] ... which became HARDIRQ-irq-safe at: > [ 13.664759] lock_acquire+0xec/0x368 > [ 13.666926] _raw_spin_lock+0x60/0x88 > [ 13.669979] handle_fasteoi_irq+0x30/0x178 > [ 13.674082] generic_handle_irq+0x38/0x50 > [ 13.678098] __handle_domain_irq+0x6c/0xc8 > [ 13.682209] gic_handle_irq+0x5c/0xb0 > [ 13.685872] el1_irq+0xd0/0x180 > [ 13.689010] arch_cpu_idle+0x40/0x220 > [ 13.692732] default_idle_call+0x54/0x60 > [ 13.696677] do_idle+0x23c/0x2e8 > [ 13.699903] cpu_startup_entry+0x30/0x50 > [ 13.703852] rest_init+0x1e0/0x2b4 > [ 13.707301] arch_call_rest_init+0x18/0x24 > [ 13.711449] start_kernel+0x4ec/0x51c > [ 13.715167] > [ 13.715167] to a HARDIRQ-irq-unsafe lock: > [ 13.722426] (&ctl->lock){+.+.}-{2:2} > [ 13.722430] > [ 13.722430] ... which became HARDIRQ-irq-unsafe at: > [ 13.732319] ... > [ 13.732324] lock_acquire+0xec/0x368 > [ 13.735985] _raw_spin_lock+0x60/0x88 > [ 13.739452] meson_gpio_irq_domain_alloc+0xcc/0x290 > [ 13.744392] irq_domain_alloc_irqs_hierarchy+0x24/0x60 > [ 13.749586] __irq_domain_alloc_irqs+0x160/0x2f0 > [ 13.754254] irq_create_fwspec_mapping+0x118/0x320 > [ 13.759073] irq_create_of_mapping+0x78/0xa0 > [ 13.763360] of_irq_get+0x6c/0x80 > [ 13.766701] of_mdiobus_register_phy+0x10c/0x238 [of_mdio] > [ 13.772227] of_mdiobus_register+0x158/0x380 [of_mdio] > [ 13.777388] mdio_mux_init+0x180/0x2e8 [mdio_mux] > [ 13.782128] g12a_mdio_mux_probe+0x290/0x398 [mdio_mux_meson_g12a] > [ 13.788349] platform_drv_probe+0x5c/0xb0 > [ 13.792379] really_probe+0xe4/0x448 > [ 13.795979] driver_probe_device+0xe8/0x140 > [ 13.800189] __device_attach_driver+0x94/0x120 > [ 13.804639] bus_for_each_drv+0x84/0xd8 > [ 13.808474] __device_attach+0xe4/0x168 > [ 13.812361] device_initial_probe+0x1c/0x28 > [ 13.816592] bus_probe_device+0xa4/0xb0 > [ 13.820430] deferred_probe_work_func+0xa8/0x100 > [ 13.825064] process_one_work+0x264/0x688 > [ 13.829088] worker_thread+0x4c/0x458 > [ 13.832768] kthread+0x154/0x158 > [ 13.836018] ret_from_fork+0x10/0x18 > [ 13.839612] > [ 13.839612] other info that might help us debug this: > [ 13.839612] > [ 13.850354] Possible interrupt unsafe locking scenario: > [ 13.850354] > [ 13.855720] CPU0 CPU1 > [ 13.858774] ---- ---- > [ 13.863242] lock(&ctl->lock); > [ 13.866330] local_irq_disable(); > [ 13.872233] lock(&irq_desc_lock_class); > [ 13.878705] lock(&ctl->lock); > [ 13.884297] <Interrupt> > [ 13.886857] lock(&irq_desc_lock_class); > [ 13.891014] > [ 13.891014] *** DEADLOCK *** > > The issue can occur when CPU1 is doing something like irq_set_type() > and CPU0 performing an interrupt allocation, for example. Taking > an interrupt (like the one being reconfigured) would lead to a deadlock. > > A solution to this is: > > - Reorder the locking so that meson_gpio_irq_update_bits takes the lock > itself at all times, instead of relying on the caller to lock or not, > hence making the RMW sequence atomic, > > - Rework the critical section in meson_gpio_irq_request_channel to only > cover the allocation itself, and let the gpio_irq_sel_pin callback > deal with its own locking if required, > > - Take the private spin-lock with interrupts disabled at all times > > Signed-off-by: Marc Zyngier <maz@kernel.org> > --- > drivers/irqchip/irq-meson-gpio.c | 18 ++++++++++-------- > 1 file changed, 10 insertions(+), 8 deletions(-) > > diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c > index ccc7f823911b..bc7aebcc96e9 100644 > --- a/drivers/irqchip/irq-meson-gpio.c > +++ b/drivers/irqchip/irq-meson-gpio.c > @@ -144,12 +144,17 @@ struct meson_gpio_irq_controller { > static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl, > unsigned int reg, u32 mask, u32 val) > { > + unsigned long flags; > u32 tmp; > > + spin_lock_irqsave(&ctl->lock, flags); > + > tmp = readl_relaxed(ctl->base + reg); > tmp &= ~mask; > tmp |= val; > writel_relaxed(tmp, ctl->base + reg); > + > + spin_unlock_irqrestore(&ctl->lock, flags); > } > > static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl) > @@ -196,14 +201,15 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl, > unsigned long hwirq, > u32 **channel_hwirq) > { > + unsigned long flags; > unsigned int idx; > > - spin_lock(&ctl->lock); > + spin_lock_irqsave(&ctl->lock, flags); > > /* Find a free channel */ > idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL); > if (idx >= NUM_CHANNEL) { > - spin_unlock(&ctl->lock); > + spin_unlock_irqrestore(&ctl->lock, flags); > pr_err("No channel available\n"); > return -ENOSPC; > } > @@ -211,6 +217,8 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl, > /* Mark the channel as used */ > set_bit(idx, ctl->channel_map); > > + spin_unlock_irqrestore(&ctl->lock, flags); > + > /* > * Setup the mux of the channel to route the signal of the pad > * to the appropriate input of the GIC > @@ -225,8 +233,6 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl, > */ > *channel_hwirq = &(ctl->channel_irqs[idx]); > > - spin_unlock(&ctl->lock); > - > pr_debug("hwirq %lu assigned to channel %d - irq %u\n", > hwirq, idx, **channel_hwirq); > > @@ -287,13 +293,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl, > val |= REG_EDGE_POL_LOW(params, idx); > } > > - spin_lock(&ctl->lock); > - > meson_gpio_irq_update_bits(ctl, REG_EDGE_POL, > REG_EDGE_POL_MASK(params, idx), val); > > - spin_unlock(&ctl->lock); > - > return 0; > } >
-- Jazz is not dead. It just smells funny...
| |