lkml.org 
[lkml]   [2020]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 1/3] dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
From
Date
Quoting Sandeep Maheswaram (2020-04-01 23:38:52)
> Convert QMP PHY bindings to DT schema format using json-schema.
>
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
> .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 332 +++++++++++++++++++++
> .../devicetree/bindings/phy/qcom-qmp-phy.txt | 242 ---------------
> 2 files changed, 332 insertions(+), 242 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> new file mode 100644
> index 0000000..18a8985
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -0,0 +1,332 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm QMP PHY controller
> +
> +maintainers:
> + - Manu Gautam <mgautam@codeaurora.org>
> +
> +description:
> + QMP phy controller supports physical layer functionality for a number of
> + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,ipq8074-qmp-pcie-phy
> + - qcom,msm8996-qmp-pcie-phy
> + - qcom,msm8996-qmp-ufs-phy
> + - qcom,msm8996-qmp-usb3-phy
> + - qcom,msm8998-qmp-pcie-phy
> + - qcom,msm8998-qmp-ufs-phy
> + - qcom,msm8998-qmp-usb3-phy
> + - qcom,sdm845-qhp-pcie-phy
> + - qcom,sdm845-qmp-pcie-phy
> + - qcom,sdm845-qmp-ufs-phy
> + - qcom,sdm845-qmp-usb3-phy
> + - qcom,sdm845-qmp-usb3-uni-phy
> + - qcom,sm8150-qmp-ufs-phy
> +
> + reg:
> + minItems: 1
> + items:
> + - description: Address and length of PHY's common serdes block.
> + - description: Address and length of the DP_COM control block.

This DP_COM block is only for one compatible. Is it possible to split
that compatible out of this binding so we can enforce the reg property
being either one or two items?

In addition, I don't quite understand how this binding is supposed to
work with the DP phy that sits inside qcom,sdm845-qmp-usb3-phy and then
gets muxed out on the USB pins on sdm845 and sc7180 SoCs. Can you fill
me in on how we plan to share the pins between the two phys so that all
the combinations of DP and USB over the type-c pins will work here? My
understanding is that the pins that are controlled by this hardware
block are basically a full USB type-c connector pinout[1] (except that
D+/D- isn't there and the VBUS and CC lines go to the PMIC). Either way,
we get the TX1/2 and RX1/2 pins to use, so we can do 4x lanes of DP or
2x lanes DP and 2x lanes of USB. There's also a type-c orientation
flipper bit that can flip the DP and USB phy lanes to the correct TX/RX
pins on the SoC. And then the DP phy has a lane remapper to change the
logical DP lane to the physical DP lane. It's a complex piece of
hardware that isn't fully represented by this binding.

[1] https://en.wikipedia.org/wiki/USB-C#/media/File:USB_Type-C_Receptacle_Pinout.svg

\
 
 \ /
  Last update: 2020-04-14 23:23    [W:0.099 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site