lkml.org 
[lkml]   [2020]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] clk: meson8b: updates for video clocks / resets
Date
This is the first batch of fixes and updates for the Meson8/8b/8m2
clock controller driver.

The first patch fixes the video clock hierarchy. Special thanks to
Neil for providing a lot of details about the video clock tree!

The second and third came up while testing video output on my EC-100
(Endless Mini). This board is special because u-boot does not enable
the video outputs like most other u-boot versions do. However, this
is very useful for development because it shows (the hard way ;))
where the existing code is buggy.

The last patch is a small improvement for the VPU clock so we
utilize the glitch-free mux (on SoCs which support it) and avoid
problems by changing the "live" clock tree at runtime (with the mali
clock this resulted in system hangs/freezes).

In my opinion all of these patches - including the fixes - can go to
"next" because the relevant clock trees are still read-only.


Martin Blumenstingl (4):
clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
clk: meson: meson8b: Fix the polarity of the RESET_N lines
clk: meson: meson8b: Fix the vclk_div{1,2,4,6,12}_en gate bits
clk: meson: meson8b: Make the CCF use the glitch-free VPU mux

drivers/clk/meson/meson8b.c | 107 +++++++++++++++++++++++++-----------
1 file changed, 75 insertions(+), 32 deletions(-)

--
2.26.0

\
 
 \ /
  Last update: 2020-04-14 22:02    [W:0.213 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site