lkml.org 
[lkml]   [2020]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] ASoC: bdw-rt5650: remove 3-channel capture support
From
Date


On 4/13/20 3:28 AM, Brent Lu wrote:
> Implement a constrain to exclude 3-channel capture since only 2 and 4
> channel capture are supported on the platform.

That looks like an error caught by the ALSA conformance tool?

What are the odds that we have a similar issue with the other broadwell
drivers which don't have a constraint on the number of channels either
on their 'System PCM' dailink?

Thanks
-Pierre

>
> Signed-off-by: Brent Lu <brent.lu@intel.com>
> ---
> sound/soc/intel/boards/bdw-rt5650.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/sound/soc/intel/boards/bdw-rt5650.c b/sound/soc/intel/boards/bdw-rt5650.c
> index af2f502..eedbdad 100644
> --- a/sound/soc/intel/boards/bdw-rt5650.c
> +++ b/sound/soc/intel/boards/bdw-rt5650.c
> @@ -83,6 +83,36 @@ static struct snd_soc_jack_pin mic_jack_pin = {
> .mask = SND_JACK_MICROPHONE,
> };
>
> +static const unsigned int channels[] = {
> + 2, 4,
> +};
> +
> +static const struct snd_pcm_hw_constraint_list constraints_channels = {
> + .count = ARRAY_SIZE(channels),
> + .list = channels,
> + .mask = 0,
> +};
> +
> +static int bdw_fe_startup(struct snd_pcm_substream *substream)
> +{
> + struct snd_pcm_runtime *runtime = substream->runtime;
> +
> + /*
> + * On this platform for PCM device we support,
> + * 2 or 4 channel capture
> + */
> + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
> + snd_pcm_hw_constraint_list(runtime, 0,
> + SNDRV_PCM_HW_PARAM_CHANNELS,
> + &constraints_channels);
> +
> + return 0;
> +}
> +
> +static const struct snd_soc_ops bdw_rt5650_fe_ops = {
> + .startup = bdw_fe_startup,
> +};
> +
> static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
> struct snd_pcm_hw_params *params)
> {
> @@ -234,6 +264,7 @@ static struct snd_soc_dai_link bdw_rt5650_dais[] = {
> .name = "System PCM",
> .stream_name = "System Playback",
> .dynamic = 1,
> + .ops = &bdw_rt5650_fe_ops,
> #if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
> .init = bdw_rt5650_rtd_init,
> #endif
>

\
 
 \ /
  Last update: 2020-04-13 12:47    [W:0.093 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site