lkml.org 
[lkml]   [2020]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: phy: jz4770: Add a missing '\n' in a log message
Hi Christophe,

Le sam. 11 avril 2020 à 8:38, Christophe JAILLET
<christophe.jaillet@wanadoo.fr> a écrit :
> Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.

Is that so?

From what I could see these macros add the \n themselves if needed. So
the \n were omitted on purpose.

-Paul

> Fixes: 541368b46b82 ("usb: phy: Add driver for the Ingenic JZ4770 USB
> transceiver")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---
> drivers/usb/phy/phy-jz4770.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-jz4770.c
> b/drivers/usb/phy/phy-jz4770.c
> index 3ea1f5b9bcf8..8f62dc2a90ff 100644
> --- a/drivers/usb/phy/phy-jz4770.c
> +++ b/drivers/usb/phy/phy-jz4770.c
> @@ -125,13 +125,13 @@ static int jz4770_phy_init(struct usb_phy *phy)
>
> err = regulator_enable(priv->vcc_supply);
> if (err) {
> - dev_err(priv->dev, "Unable to enable VCC: %d", err);
> + dev_err(priv->dev, "Unable to enable VCC: %d\n", err);
> return err;
> }
>
> err = clk_prepare_enable(priv->clk);
> if (err) {
> - dev_err(priv->dev, "Unable to start clock: %d", err);
> + dev_err(priv->dev, "Unable to start clock: %d\n", err);
> return err;
> }
>
> @@ -191,7 +191,7 @@ static int jz4770_phy_probe(struct
> platform_device *pdev)
>
> priv->base = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(priv->base)) {
> - dev_err(dev, "Failed to map registers");
> + dev_err(dev, "Failed to map registers\n");
> return PTR_ERR(priv->base);
> }
>
> @@ -199,7 +199,7 @@ static int jz4770_phy_probe(struct
> platform_device *pdev)
> if (IS_ERR(priv->clk)) {
> err = PTR_ERR(priv->clk);
> if (err != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get clock");
> + dev_err(dev, "Failed to get clock\n");
> return err;
> }
>
> @@ -207,14 +207,14 @@ static int jz4770_phy_probe(struct
> platform_device *pdev)
> if (IS_ERR(priv->vcc_supply)) {
> err = PTR_ERR(priv->vcc_supply);
> if (err != -EPROBE_DEFER)
> - dev_err(dev, "failed to get regulator");
> + dev_err(dev, "Failed to get regulator\n");
> return err;
> }
>
> err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
> if (err) {
> if (err != -EPROBE_DEFER)
> - dev_err(dev, "Unable to register PHY");
> + dev_err(dev, "Unable to register PHY\n");
> return err;
> }
>
> --
> 2.20.1
>


\
 
 \ /
  Last update: 2020-04-11 15:15    [W:0.056 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site