lkml.org 
[lkml]   [2020]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.6 13/38] r8169: change back SG and TSO to be disabled by default
Date
From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 95099c569a9fdbe186a27447dfa8a5a0562d4b7f ]

There has been a number of reports that using SG/TSO on different chip
versions results in tx timeouts. However for a lot of people SG/TSO
works fine. Therefore disable both features by default, but allow users
to enable them. Use at own risk!

Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/realtek/r8169_main.c | 34 ++++++++++++++----------------
1 file changed, 16 insertions(+), 18 deletions(-)

--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -5549,12 +5549,10 @@ static int rtl_init_one(struct pci_dev *

netif_napi_add(dev, &tp->napi, rtl8169_poll, NAPI_POLL_WEIGHT);

- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
- NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX |
- NETIF_F_HW_VLAN_CTAG_RX;
- dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
- NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX |
- NETIF_F_HW_VLAN_CTAG_RX;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+ dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
NETIF_F_HIGHDMA;
dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
@@ -5572,25 +5570,25 @@ static int rtl_init_one(struct pci_dev *
dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX;

if (rtl_chip_supports_csum_v2(tp)) {
- dev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
- dev->features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+ dev->hw_features |= NETIF_F_IPV6_CSUM;
+ dev->features |= NETIF_F_IPV6_CSUM;
+ }
+
+ /* There has been a number of reports that using SG/TSO results in
+ * tx timeouts. However for a lot of people SG/TSO works fine.
+ * Therefore disable both features by default, but allow users to
+ * enable them. Use at own risk!
+ */
+ if (rtl_chip_supports_csum_v2(tp)) {
+ dev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6;
dev->gso_max_size = RTL_GSO_MAX_SIZE_V2;
dev->gso_max_segs = RTL_GSO_MAX_SEGS_V2;
} else {
+ dev->hw_features |= NETIF_F_SG | NETIF_F_TSO;
dev->gso_max_size = RTL_GSO_MAX_SIZE_V1;
dev->gso_max_segs = RTL_GSO_MAX_SEGS_V1;
}

- /* RTL8168e-vl and one RTL8168c variant are known to have a
- * HW issue with TSO.
- */
- if (tp->mac_version == RTL_GIGA_MAC_VER_34 ||
- tp->mac_version == RTL_GIGA_MAC_VER_22) {
- dev->vlan_features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
- dev->hw_features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
- dev->features &= ~(NETIF_F_ALL_TSO | NETIF_F_SG);
- }
-
dev->hw_features |= NETIF_F_RXALL;
dev->hw_features |= NETIF_F_RXFCS;


\
 
 \ /
  Last update: 2020-04-11 14:23    [W:0.120 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site