lkml.org 
[lkml]   [2020]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 019/102] mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
Date
From: Michał Mirosław <mirq-linux@rere.qmqm.pl>

commit 53dd0a7cd65edc83b0c243d1c08377c8b876b2ee upstream.

SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.

Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.

Cc: stable@vger.kernel.org
Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/mmc/host/sdhci-of-at91.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -126,7 +126,8 @@ static void sdhci_at91_reset(struct sdhc
{
sdhci_reset(host, mask);

- if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ || mmc_gpio_get_cd(host->mmc) >= 0)
sdhci_at91_set_force_card_detect(host);
}

@@ -354,8 +355,11 @@ static int sdhci_at91_probe(struct platf
* detection procedure using the SDMCC_CD signal is bypassed.
* This bit is reset when a software reset for all command is performed
* so we need to implement our own reset function to set back this bit.
+ *
+ * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
*/
- if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ || mmc_gpio_get_cd(host->mmc) >= 0)
sdhci_at91_set_force_card_detect(host);

pm_runtime_put_autosuspend(&pdev->dev);

\
 
 \ /
  Last update: 2020-04-01 18:35    [W:0.600 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site