Messages in this thread | | | Subject | Re: [PATCH v2] ARM: imx: allow to disable board specific PHY fixups | From | Marc Kleine-Budde <> | Date | Tue, 31 Mar 2020 10:00:12 +0200 |
| |
On 3/31/20 9:54 AM, Russell King - ARM Linux admin wrote: > On Tue, Mar 31, 2020 at 09:47:19AM +0200, Marc Kleine-Budde wrote: >> On 3/30/20 7:41 PM, Russell King - ARM Linux admin wrote: >>>>> arch/arm/mach-imx/mach-imx6q.c:167: phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, >>>>> arch/arm/mach-imx/mach-imx6q.c:169: phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, >>>>> arch/arm/mach-imx/mach-imx6q.c:171: phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef, >>>>> arch/arm/mach-imx/mach-imx6q.c:173: phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef, >>> >>> As far as I'm concerned, the AR8035 fixup is there with good reason. >>> It's not just "random" but is required to make the AR8035 usable with >>> the iMX6 SoCs. Not because of a board level thing, but because it's >>> required for the AR8035 to be usable with an iMX6 SoC. >> >> Is this still ture, if the AR8035 is attached to a switch behind an iMX6? > > Do you know of such a setup, or are you talking about theoretical > situations?
Granted, not for the AR8035, but for one of the KSZ Phys. This is why Oleksij started looking into this issue in the first place.
regards, Marc
-- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
| |