lkml.org 
[lkml]   [2020]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [v6] i2c: imx: support slave mode for imx I2C driver
Date
Hi Wolfram,

Any comments?

Best Regards,
Biwen Li

>
> Hi,
>
> On 04.12.19 11:00, Sascha Hauer wrote:
> > Hi,
> >
> > The patch looks ok to me now, but I still do not like the #ifdeffery
> > around CONFIG_I2C_SLAVE. With the patch I just sent (You are on Cc:)
> > we could apply the following on your patch which makes it more
> > readable and increases compile coverage.
> >
> > Wolfram, Biwen, what do you think?
>
>
> RCAR depends on slave:
> config I2C_RCAR
>
> tristate "Renesas R-Car I2C Controller"
>
> depends on ARCH_RENESAS || COMPILE_TEST
>
> select I2C_SLAVE
> see:
> drivers/i2c/busses/i2c-rcar.c
>
> So, I would suggest to do the same in imx.
>
> So far, I tested this patch on iMX6S. It works in one board (i2c-gpio + i2c-imx)
> and two board (i2c-imx + i2c-imx) configuration.
> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
>
>
> >
> > Sascha
> >
> > ---------------------------8<------------------------------
> >
> > From 52f7c2bf59db61d4b27b59ca6404136e3ed77310 Mon Sep 17
> 00:00:00
> > 2001
> > From: Sascha Hauer <s.hauer@pengutronix.de>
> > Date: Wed, 4 Dec 2019 10:56:34 +0100
> > Subject: [PATCH] fixup! i2c: imx: support slave mode for imx I2C
> > driver
> >
> > ---
> > drivers/i2c/busses/i2c-imx.c | 21 ++++++++++-----------
> > 1 file changed, 10 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-imx.c
> > b/drivers/i2c/busses/i2c-imx.c index 40ccfca600bf..c5d9ae8226cd 100644
> > --- a/drivers/i2c/busses/i2c-imx.c
> > +++ b/drivers/i2c/busses/i2c-imx.c
> > @@ -203,9 +203,7 @@ struct imx_i2c_struct {
> > struct pinctrl_state *pinctrl_pins_gpio;
> >
> > struct imx_i2c_dma *dma;
> > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > struct i2c_client *slave;
> > -#endif
> > };
> >
> > static const struct imx_i2c_hwdata imx1_i2c_hwdata = { @@ -913,12
> > +911,10 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
> >
> > dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
> >
> > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > if (i2c_imx->slave) {
> > dev_err(&i2c_imx->adapter.dev, "Please not do operations
> of master mode in slave mode");
> > return -EBUSY;
> > }
> > -#endif
> >
> > result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> > if (result < 0)
> > @@ -1068,7 +1064,6 @@ static u32 i2c_imx_func(struct i2c_adapter
> *adapter)
> > | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> > }
> >
> > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx)
> > {
> > int temp;
> > @@ -1159,6 +1154,10 @@ static int i2c_imx_reg_slave(struct i2c_client
> *client)
> > {
> > struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> > int ret;
> > +
> > + if (!IS_ENABLED(CONFIG_I2C_SLAVE))
> > + return -EINVAL;
> > +
> > if (i2c_imx->slave)
> > return -EBUSY;
> >
> > @@ -1173,6 +1172,9 @@ static int i2c_imx_unreg_slave(struct i2c_client
> *client)
> > {
> > struct imx_i2c_struct *i2c_imx =
> > i2c_get_adapdata(client->adapter);
> >
> > + if (!IS_ENABLED(CONFIG_I2C_SLAVE))
> > + return -EINVAL;
> > +
> > if (!i2c_imx->slave)
> > return -EINVAL;
> >
> > @@ -1188,15 +1190,12 @@ static int i2c_imx_unreg_slave(struct
> > i2c_client *client)
> >
> > return 0;
> > }
> > -#endif
> >
> > static const struct i2c_algorithm i2c_imx_algo = {
> > .master_xfer = i2c_imx_xfer,
> > .functionality = i2c_imx_func,
> > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > .reg_slave = i2c_imx_reg_slave,
> > .unreg_slave = i2c_imx_unreg_slave,
> > -#endif
> > };
> >
> > static irqreturn_t i2c_imx_isr(int irq, void *dev_id) @@ -1208,10
> > +1207,10 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> >
> > if (status & I2SR_IIF) {
> > i2c_imx_clr_if_bit(status, i2c_imx); -#if
> > IS_ENABLED(CONFIG_I2C_SLAVE)
> > - if (i2c_imx->slave)
> > +
> > + if (IS_ENABLED(CONFIG_I2C_SLAVE) && i2c_imx->slave)
> > return i2c_imx_slave_isr(i2c_imx); -#endif
> > +
> > i2c_imx->i2csr = status;
> > return i2c_imx_master_isr(i2c_imx);
> > }
> >
>
> Kind regards,
> Oleksij Rempel
>
> --
> Pengutronix e.K. |
> |
> Industrial Linux Solutions |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> pengutronix.de%2F&amp;data=02%7C01%7Cbiwen.li%40nxp.com%7C2374a
> 486922f4625717e08d779786b2f%7C686ea1d3bc2b4c6fa92cd99c5c30163
> 5%7C0%7C0%7C637111430406497837&amp;sdata=fiW0xphV%2FFRLNU3x
> xYaU6qzAyiydVfJwiHc5Xu%2BcvCQ%3D&amp;reserved=0 |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
> |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |
\
 
 \ /
  Last update: 2020-03-04 05:14    [W:0.137 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site