lkml.org 
[lkml]   [2020]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: dts: aspeed: zaius: Add gpio line names


On Sat, 7 Mar 2020, at 03:32, Andrew Geissler wrote:
> Name the GPIOs to help userspace work with them. The names describe the
> functionality the lines provide, not the net or ball name. This makes it
> easier to share userspace code across different systems and makes the
> use of the lines more obvious.
>
> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>

So we're creating a bit of an ad-hoc ABI here between the DT and userspace.

Where are we documenting it?

Generally I think the idea is good though, so:

Acked-by: Andrew Jeffery <andrew@aj.id.au>

> ---
> arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 37 +++++++++++++++++++---
> 1 file changed, 33 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
> b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
> index bc60ec291681..4bcc82046362 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
> @@ -478,32 +478,61 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_gpioh_unbiased>;
>
> + gpio-line-names =
> + /*A0-A7*/ "","cfam-reset","","","","","","",
> + /*B0-B7*/ "","","","","","","","",
> + /*C0-C7*/ "","","","","","","","",
> + /*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention",
> + "led-fault",
> + /*E0-E7*/ "","","","","","","","presence-pcie-e2b",
> + /*F0-F7*/ "","","","","","","","checkstop",
> + /*G0-G7*/ "fsi-clock","fsi-data","","","","","","",
> + /*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","",
> + /*I0-I7*/ "","","","power-button","","","","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","","","","","","",
> + /*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","",
> + /*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
> + "","fsi-mux","",
> + /*Q0-Q7*/ "","","","","","","","",
> + /*R0-R7*/ "","","","","","","","",
> + /*S0-S7*/ "","","","","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "","","","","","","","",
> + /*AA0-AA7*/ "","","led-hdd-fault","","","","","",
> + /*AB0-AB7*/ "","","","","","","","",
> + /*AC0-AC7*/ "","","","","","","","";
> +
> line_iso_u146_en {
> gpio-hog;
> gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
> output-high;
> - line-name = "iso_u164_en";
> };
>
> ncsi_mux_en_n {
> gpio-hog;
> gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
> output-low;
> - line-name = "ncsi_mux_en_n";
> };
>
> line_bmc_i2c2_sw_rst_n {
> gpio-hog;
> gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
> output-high;
> - line-name = "bmc_i2c2_sw_rst_n";
> };
>
> line_bmc_i2c5_sw_rst_n {
> gpio-hog;
> gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
> output-high;
> - line-name = "bmc_i2c5_sw_rst_n";
> };
> };
>
> --
> 2.21.0 (Apple Git-122)
>
>

\
 
 \ /
  Last update: 2020-03-27 00:22    [W:0.057 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site