lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 2/8] i2c: i801: Use GPIO_LOOKUP() helper macro
On Tue, 24 Mar 2020 14:56:47 +0100, Geert Uytterhoeven wrote:
> i801_add_mux() fills in the GPIO lookup table by manually populating an
> array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper
> macro instead, to relax a dependency on the gpiod_lookup structure's
> member names.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: linux-i2c@vger.kernel.org
> ---
> While this patch is a dependency for "[PATCH v6 4/8] gpiolib: Add
> support for GPIO lookup by line name", it can be applied independently.
> But an Acked-by would be nice, too.
>
> Cover letter and full series at
> https://lore.kernel.org/r/20200324135328.5796-1-geert+renesas@glider.be/
>
> v6:
> - New.
> ---
> drivers/i2c/busses/i2c-i801.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index ca4f096fef749302..8e64a71bea684cc7 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -1444,9 +1444,9 @@ static int i801_add_mux(struct i801_priv *priv)
> return -ENOMEM;
> lookup->dev_id = "i2c-mux-gpio";
> for (i = 0; i < mux_config->n_gpios; i++) {
> - lookup->table[i].chip_label = mux_config->gpio_chip;
> - lookup->table[i].chip_hwnum = mux_config->gpios[i];
> - lookup->table[i].con_id = "mux";
> + lookup->table[i] = (struct gpiod_lookup)
> + GPIO_LOOKUP(mux_config->gpio_chip,
> + mux_config->gpios[i], "mux", 0);
> }
> gpiod_add_lookup_table(lookup);
> priv->lookup = lookup;

Reviewed-by: Jean Delvare <jdelvare@suse.de>

--
Jean Delvare
SUSE L3 Support

\
 
 \ /
  Last update: 2020-03-25 10:16    [W:0.117 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site