lkml.org 
[lkml]   [2020]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] rtc: pm8xxx: clear alarm register when alarm is not enabled
Hi,

Isn't that the same as:
https://patchwork.ozlabs.org/patch/1257381/ ?

On 21/03/2020 19:50:17+0800, 韩科才 wrote:
> Clear alarm register when alarm is not enabled otherwise the consumer
> may still start alarm timer if it find the alarm register is not zero.
>
> Signed-off-by: hankecai <hankecai@vivo.com>
> ---
> drivers/rtc/rtc-pm8xxx.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
> index 07ea1be3abb9..3fa5416ad90d 100644
> --- a/drivers/rtc/rtc-pm8xxx.c
> +++ b/drivers/rtc/rtc-pm8xxx.c
> @@ -301,6 +301,7 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
> struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
> const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
> unsigned int ctrl_reg;
> + u8 value[NUM_8_BIT_RTC_REGS] = {0};
>
> spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
>
> @@ -319,6 +320,16 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
> goto rtc_rw_fail;
> }
>
> + /* Clear Alarm register */
> + if (!enable) {
> + rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
> + sizeof(value));
> + if (rc) {
> + dev_err(dev, "Clear RTC ALARM register failed\n");
> + goto rtc_rw_fail;
> + }
> + }
> +
> rtc_rw_fail:
> spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
> return rc;
> --
> 2.21.0
>
>
>

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-03-21 14:22    [W:0.048 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site