lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V3 2/4] mailbox: imx: restructure code to make easy for new MU
From
Date


On 02.03.20 10:58, Peng Fan wrote:
> Hi Oleksij,
>
>> Subject: Re: [PATCH V3 2/4] mailbox: imx: restructure code to make easy for
>> new MU
>>
>> Hi Peng,
>>
>> On 26.02.20 05:40, peng.fan@nxp.com wrote:
>>> From: Peng Fan <peng.fan@nxp.com>
>>>
>>> Add imx_mu_generic_tx for data send and imx_mu_generic_rx for
>>> interrupt data receive.
>>> Add 'type' for MU type.
>>>
>>> With these, it will be a bit easy to introduce i.MX8/8X SCU type MU
>>> dedicated to communicate with SCU.
>>>
>>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>>> ---
>>>
>>> V3:
>>> New patch, restructure code.
>>>
>>> drivers/mailbox/imx-mailbox.c | 100
>> ++++++++++++++++++++++++++++--------------
>>> 1 file changed, 67 insertions(+), 33 deletions(-)
>>>
>>> diff --git a/drivers/mailbox/imx-mailbox.c
>>> b/drivers/mailbox/imx-mailbox.c index 2cdcdc5f1119..901a3431fdb5
>>> 100644
>>> --- a/drivers/mailbox/imx-mailbox.c
>>> +++ b/drivers/mailbox/imx-mailbox.c
>>> @@ -36,7 +36,17 @@ enum imx_mu_chan_type {
>>> IMX_MU_TYPE_RXDB, /* Rx doorbell */
>>> };
>>>
>>> +enum imx_mu_type {
>>> + IMX_MU_TYPE_GENERIC,
>>> +};
>>
>> I assume this enum is not needed, see my next email
>
> This is to just differentiate with SCU MU, ok, will check your next email.
> Then back if anything I not follow up.
>
>>> +struct imx_mu_priv;
>>> +struct imx_mu_con_priv;
>>> +
>>> struct imx_mu_dcfg {
>>> + enum imx_mu_type type;
>>> + int (*tx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp, void
>> *data);
>>> + int (*rx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp);
>>> u32 xTR[4]; /* Transmit Registers */
>>> u32 xRR[4]; /* Receive Registers */
>>> u32 xSR; /* Status Register */
>>> @@ -67,20 +77,6 @@ struct imx_mu_priv {
>>> bool side_b;
>>> };
>>>
>>> -static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
>>> - .xTR = {0x0, 0x4, 0x8, 0xc},
>>> - .xRR = {0x10, 0x14, 0x18, 0x1c},
>>> - .xSR = 0x20,
>>> - .xCR = 0x24,
>>> -};
>>> -
>>> -static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
>>> - .xTR = {0x20, 0x24, 0x28, 0x2c},
>>> - .xRR = {0x40, 0x44, 0x48, 0x4c},
>>> - .xSR = 0x60,
>>> - .xCR = 0x64,
>>> -};
>>
>> Please, do not move it.
>
> Ok. Then I need to add imx_mu_generic_tx prototype above the
> upper two.

Ah... this was the reason. Then please ignore my comment :)

> Thanks,
> Peng.
>
>>
>>> static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller
>> *mbox)
>>> {
>>> return container_of(mbox, struct imx_mu_priv, mbox); @@ -111,6
>>> +107,40 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set,
>> u32 clr)
>>> return val;
>>> }
>>>
>>> +static int imx_mu_generic_tx(struct imx_mu_priv *priv,
>>> + struct imx_mu_con_priv *cp,
>>> + void *data)
>>> +{
>>> + u32 *arg = data;
>>> +
>>> + switch (cp->type) {
>>> + case IMX_MU_TYPE_TX:
>>> + imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
>>> + imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
>>> + break;
>>> + case IMX_MU_TYPE_TXDB:
>>> + imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIRn(cp->idx), 0);
>>> + tasklet_schedule(&cp->txdb_tasklet);
>>> + break;
>>> + default:
>>> + dev_warn_ratelimited(priv->dev, "Send data on wrong channel
>> type: %d\n", cp->type);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int imx_mu_generic_rx(struct imx_mu_priv *priv,
>>> + struct imx_mu_con_priv *cp)
>>> +{
>>> + u32 dat;
>>> +
>>> + dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
>>> + mbox_chan_received_data(cp->chan, (void *)&dat);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> static void imx_mu_txdb_tasklet(unsigned long data)
>>> {
>>> struct imx_mu_con_priv *cp = (struct imx_mu_con_priv *)data; @@
>>> -123,7 +153,7 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
>>> struct mbox_chan *chan = p;
>>> struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
>>> struct imx_mu_con_priv *cp = chan->con_priv;
>>> - u32 val, ctrl, dat;
>>> + u32 val, ctrl;
>>>
>>> ctrl = imx_mu_read(priv, priv->dcfg->xCR);
>>> val = imx_mu_read(priv, priv->dcfg->xSR); @@ -152,8 +182,7 @@
>>> static irqreturn_t imx_mu_isr(int irq, void *p)
>>> imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
>>> mbox_chan_txdone(chan, 0);
>>> } else if (val == IMX_MU_xSR_RFn(cp->idx)) {
>>> - dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
>>> - mbox_chan_received_data(chan, (void *)&dat);
>>> + priv->dcfg->rx(priv, cp);
>>> } else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
>>> imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx),
>> priv->dcfg->xSR);
>>> mbox_chan_received_data(chan, NULL); @@ -169,23 +198,8
>> @@ static
>>> int imx_mu_send_data(struct mbox_chan *chan, void *data)
>>> {
>>> struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
>>> struct imx_mu_con_priv *cp = chan->con_priv;
>>> - u32 *arg = data;
>>> -
>>> - switch (cp->type) {
>>> - case IMX_MU_TYPE_TX:
>>> - imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
>>> - imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
>>> - break;
>>> - case IMX_MU_TYPE_TXDB:
>>> - imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIRn(cp->idx), 0);
>>> - tasklet_schedule(&cp->txdb_tasklet);
>>> - break;
>>> - default:
>>> - dev_warn_ratelimited(priv->dev, "Send data on wrong channel
>> type: %d\n", cp->type);
>>> - return -EINVAL;
>>> - }
>>>
>>> - return 0;
>>> + return priv->dcfg->tx(priv, cp, data);
>>> }
>>>
>>> static int imx_mu_startup(struct mbox_chan *chan) @@ -367,6 +381,26
>>> @@ static int imx_mu_remove(struct platform_device *pdev)
>>> return 0;
>>> }
>>>
>>> +static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
>>> + .type = IMX_MU_TYPE_GENERIC,
>>> + .tx = imx_mu_generic_tx,
>>> + .rx = imx_mu_generic_rx,
>>> + .xTR = {0x0, 0x4, 0x8, 0xc},
>>> + .xRR = {0x10, 0x14, 0x18, 0x1c},
>>> + .xSR = 0x20,
>>> + .xCR = 0x24,
>>> +};
>>> +
>>> +static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
>>> + .type = IMX_MU_TYPE_GENERIC,
>>> + .tx = imx_mu_generic_tx,
>>> + .rx = imx_mu_generic_rx,
>>> + .xTR = {0x20, 0x24, 0x28, 0x2c},
>>> + .xRR = {0x40, 0x44, 0x48, 0x4c},
>>> + .xSR = 0x60,
>>> + .xCR = 0x64,
>>> +};
>>> +
>>> static const struct of_device_id imx_mu_dt_ids[] = {
>>> { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
>>> { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
>>>
>>
>> Kind regards,
>> Oleksij Rempel
>>
>> --
>> Pengutronix e.K. |
>> |
>> Industrial Linux Solutions |
>> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.p
>> engutronix.de%2F&amp;data=02%7C01%7Cpeng.fan%40nxp.com%7Ccf660c
>> 3909e14128e65f08d7be898905%7C686ea1d3bc2b4c6fa92cd99c5c301635%
>> 7C0%7C0%7C637187370224967554&amp;sdata=ZdgIGuzpnhX1liQO4KmCtXx
>> jjg%2BnDJoPze4pfVXIAig%3D&amp;reserved=0 |
>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
>> |
>> Amtsgericht Hildesheim, HRA 2686 | Fax:
>> +49-5121-206917-5555 |

Kind regards,
Oleksij Rempel

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2020-03-02 11:06    [W:0.066 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site