lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 10/42] docs: scsi: convert bnx2fc.txt to ReST
    Date
    Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
    ---
    Documentation/scsi/{bnx2fc.txt => bnx2fc.rst} | 18 ++++++++++++------
    Documentation/scsi/index.rst | 1 +
    2 files changed, 13 insertions(+), 6 deletions(-)
    rename Documentation/scsi/{bnx2fc.txt => bnx2fc.rst} (91%)

    diff --git a/Documentation/scsi/bnx2fc.txt b/Documentation/scsi/bnx2fc.rst
    similarity index 91%
    rename from Documentation/scsi/bnx2fc.txt
    rename to Documentation/scsi/bnx2fc.rst
    index 80823556d62f..2fef2dff80c7 100644
    --- a/Documentation/scsi/bnx2fc.txt
    +++ b/Documentation/scsi/bnx2fc.rst
    @@ -1,3 +1,6 @@
    +.. SPDX-License-Identifier: GPL-2.0
    +
    +===========================
    Operating FCoE using bnx2fc
    ===========================
    Broadcom FCoE offload through bnx2fc is full stateful hardware offload that
    @@ -24,6 +27,7 @@ Driver Usage Model:

    2. Configure the interfaces on which bnx2fc driver has to operate on.
    Here are the steps to configure:
    +
    a. cd /etc/fcoe
    b. copy cfg-ethx to cfg-eth5 if FCoE has to be enabled on eth5.
    c. Repeat this for all the interfaces where FCoE has to be enabled.
    @@ -39,8 +43,10 @@ discovery and log into the targets.

    5. "Symbolic Name" in 'fcoeadm -i' output would display if bnx2fc has claimed
    the interface.
    -Eg:
    -[root@bh2 ~]# fcoeadm -i
    +
    +Eg::
    +
    + [root@bh2 ~]# fcoeadm -i
    Description: NetXtreme II BCM57712 10 Gigabit Ethernet
    Revision: 01
    Manufacturer: Broadcom Corporation
    @@ -60,16 +66,16 @@ Eg:
    State: Online

    6. Verify the vlan discovery is performed by running ifconfig and notice
    -<INTERFACE>.<VLAN>-fcoe interfaces are automatically created.
    + <INTERFACE>.<VLAN>-fcoe interfaces are automatically created.

    Refer to fcoeadm manpage for more information on fcoeadm operations to
    create/destroy interfaces or to display lun/target information.

    -NOTE:
    +NOTE
    ====
    ** Broadcom FCoE capable devices implement a DCBX/LLDP client on-chip. Only one
    LLDP client is allowed per interface. For proper operation all host software
    based DCBX/LLDP clients (e.g. lldpad) must be disabled. To disable lldpad on a
    -given interface, run the following command:
    +given interface, run the following command::

    -lldptool set-lldp -i <interface_name> adminStatus=disabled
    + lldptool set-lldp -i <interface_name> adminStatus=disabled
    diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
    index 1e37227f3536..d453fb3f1f7d 100644
    --- a/Documentation/scsi/index.rst
    +++ b/Documentation/scsi/index.rst
    @@ -14,5 +14,6 @@ Linux SCSI Subsystem
    aic79xx
    aic7xxx
    bfa
    + bnx2fc

    scsi_transport_srp/figures
    --
    2.21.1
    \
     
     \ /
      Last update: 2020-03-02 09:19    [W:6.223 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site