lkml.org 
[lkml]   [2020]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 00/12] NXP DSPI bugfixes and support for LS1028A
On Wed, 18 Mar 2020 at 21:03, Michael Walle <michael@walle.cc> wrote:
>
> Am 2020-03-18 01:15, schrieb Vladimir Oltean:
> > From: Vladimir Oltean <vladimir.oltean@nxp.com>
> >
> > This series addresses a few issues that were missed during the previous
> > series "[PATCH 00/12] TCFQ to XSPI migration for NXP DSPI driver", on
> > SoCs other than LS1021A and LS1043A. DMA mode has been completely
> > broken
> > by that series, and XSPI mode never worked on little-endian
> > controllers.
> >
> > Then it introduces support for the LS1028A chip, whose compatible has
> > recently been documented here:
> >
> > https://lore.kernel.org/linux-devicetree/20200218171418.18297-1-michael@walle.cc/
> >
> > The device tree for the LS1028A SoC is extended with DMA channels
> > definition, such that even though the default operating mode is XSPI,
> > one can simply change DSPI_XSPI_MODE to DSPI_DMA_MODE in the
> > devtype_data structure of the driver and use that instead.
> >
> > Compared to earlier v4, the only change is in patch 05/12 to fix a race
> > condition signaled by Michael Walle here:
> > https://lkml.org/lkml/2020/3/17/740
> >
> > I don't expect the "fixes" patches to reach very far down the stable
> > pipe, since there has been pretty heavy refactoring in this driver.
> >
> > For testing, benchmarking and debugging, the mikroBUS connector on the
> > LS1028A-RDB is made available via spidev.
>
> Patches 1-11:
> Tested-by: Michael Walle <michael@walle.cc>
>
> Thanks Vladimir for the great work.
>

Excellent! Thanks Michael for the patience!

> -michael
>
> >
> > Vladimir Oltean (12):
> > spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR
> > spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA
> > spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode
> > spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode
> > spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight
> > spi: spi-fsl-dspi: Replace interruptible wait queue with a simple
> > completion
> > spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA
> > mode
> > spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code
> > path
> > spi: spi-fsl-dspi: Move invariant configs out of
> > dspi_transfer_one_message
> > spi: spi-fsl-dspi: Add support for LS1028A
> > arm64: dts: ls1028a: Specify the DMA channels for the DSPI
> > controllers
> > arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
> >
> > .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 14 +
> > .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 +
> > drivers/spi/spi-fsl-dspi.c | 324 +++++++++---------
> > 3 files changed, 182 insertions(+), 162 deletions(-)

-Vladimir

\
 
 \ /
  Last update: 2020-03-18 20:05    [W:0.122 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site