lkml.org 
[lkml]   [2020]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 05/18] mfd: Add support for Kontron sl28cpld management controller
Am 2020-03-18 04:28, schrieb Guenter Roeck:
> On 3/17/20 1:50 PM, Michael Walle wrote:
>> This patch adds core support for the board management controller found
>> on the SMARC-sAL28 board. It consists of the following functions:
>> - watchdog
>> - GPIO controller
>> - PWM controller
>> - fan sensor
>> - interrupt controller
>>
>> At the moment, this controller is used on the Kontron SMARC-sAL28
>> board.
>>
>> Signed-off-by: Michael Walle <michael@walle.cc>
>> ---
>> drivers/mfd/Kconfig | 21 ++++++
>> drivers/mfd/Makefile | 2 +
>> drivers/mfd/sl28cpld.c | 155
>> +++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 178 insertions(+)
>> create mode 100644 drivers/mfd/sl28cpld.c
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 3c547ed575e6..01588c366476 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -2059,5 +2059,26 @@ config SGI_MFD_IOC3
>> If you have an SGI Origin, Octane, or a PCI IOC3 card,
>> then say Y. Otherwise say N.
>>
>> +config MFD_SL28CPLD
>> + tristate "Kontron sl28 core driver"
>> + depends on I2C=y
>
> Why I2C=y and not just I2C ?

Oh this should be changed in the next patch which adds
interrupt controller support, where I2C=y is needed, correct?

-michael

>
>> + depends on OF
>> + select REGMAP_I2C
>> + select REGMAP_IRQ
>> + select SL28CPLD_IRQ
>> + select MFD_CORE
>> + help
>> + This option enables support for the board management controller
>> + found on the Kontron sl28 CPLD. You have to select individual
>> + functions, such as watchdog, GPIO, etc, under the corresponding
>> menus
>> + in order to enable them.
>> +
>> + Currently supported boards are:
>> +
>> + Kontron SMARC-sAL28
>> +
>> + To compile this driver as a module, choose M here: the module will
>> be
>> + called sl28cpld.
>> +
>> endmenu
>> endif
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index f935d10cbf0f..9bc38863b9c7 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -259,3 +259,5 @@ obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
>> obj-$(CONFIG_MFD_STMFX) += stmfx.o
>>
>> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
>> +
>> +obj-$(CONFIG_MFD_SL28CPLD) += sl28cpld.o
>> diff --git a/drivers/mfd/sl28cpld.c b/drivers/mfd/sl28cpld.c
>> new file mode 100644
>> index 000000000000..789f21f90752
>> --- /dev/null
>> +++ b/drivers/mfd/sl28cpld.c
>> @@ -0,0 +1,155 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * MFD core for the CPLD on a SMARC-sAL28 board.
>> + *
>> + * Copyright 2019 Kontron Europe GmbH
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/i2c.h>
>> +#include <linux/regmap.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/mfd/core.h>
>> +
>> +#define SL28CPLD_VERSION 0x03
>> +#define SL28CPLD_WATCHDOG_BASE 0x4
>> +#define SL28CPLD_HWMON_FAN_BASE 0xb
>> +#define SL28CPLD_PWM0_BASE 0xc
>> +#define SL28CPLD_PWM1_BASE 0xe
>> +#define SL28CPLD_GPIO0_BASE 0x10
>> +#define SL28CPLD_GPIO1_BASE 0x15
>> +#define SL28CPLD_GPO_BASE 0x1a
>> +#define SL28CPLD_GPI_BASE 0x1b
>> +#define SL28CPLD_INTC_BASE 0x1c
>> +
>> +/* all subdevices share the same IRQ */
>> +#define SL28CPLD_IRQ 0
>> +
>> +#define SL28CPLD_MIN_REQ_VERSION 14
>> +
>> +struct sl28cpld {
>> + struct device *dev;
>> + struct regmap *regmap;
>> +};
>> +
>> +static const struct regmap_config sl28cpld_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .reg_stride = 1,
>> +};
>> +
>> +static struct resource sl28cpld_watchdog_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_WATCHDOG_BASE, 1),
>> +};
>> +
>> +static struct resource sl28cpld_hwmon_fan_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_HWMON_FAN_BASE, 1),
>> +};
>> +
>> +static struct resource sl28cpld_pwm0_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_PWM0_BASE, 1),
>> +};
>> +
>> +static struct resource sl28cpld_pwm1_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_PWM1_BASE, 1),
>> +};
>> +
>> +static struct resource sl28cpld_gpio0_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_GPIO0_BASE, 1),
>> + DEFINE_RES_IRQ(SL28CPLD_IRQ),
>> +};
>> +
>> +static struct resource sl28cpld_gpio1_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_GPIO1_BASE, 1),
>> + DEFINE_RES_IRQ(SL28CPLD_IRQ),
>> +};
>> +
>> +static struct resource sl28cpld_gpo_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_GPO_BASE, 1),
>> +};
>> +
>> +static struct resource sl28cpld_gpi_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_GPI_BASE, 1),
>> +};
>> +
>> +static struct resource sl28cpld_intc_resources[] = {
>> + DEFINE_RES_REG(SL28CPLD_INTC_BASE, 1),
>> + DEFINE_RES_IRQ(SL28CPLD_IRQ),
>> +};
>> +
>> +static const struct mfd_cell sl28cpld_devs[] = {
>> + OF_MFD_CELL("sl28cpld-wdt", sl28cpld_watchdog_resources, NULL, 0, 0,
>> + "kontron,sl28cpld-wdt"),
>> + OF_MFD_CELL("sl28cpld-fan", sl28cpld_hwmon_fan_resources, NULL, 0,
>> 0,
>> + "kontron,sl28cpld-fan"),
>> + OF_MFD_CELL("sl28cpld-pwm", sl28cpld_pwm0_resources, NULL, 0, 0,
>> + "kontron,sl28cpld-pwm"),
>> + OF_MFD_CELL("sl28cpld-pwm", sl28cpld_pwm1_resources, NULL, 0, 1,
>> + "kontron,sl28cpld-pwm"),
>> + OF_MFD_CELL("sl28cpld-gpio", sl28cpld_gpio0_resources, NULL, 0, 0,
>> + "kontron,sl28cpld-gpio"),
>> + OF_MFD_CELL("sl28cpld-gpio", sl28cpld_gpio1_resources, NULL, 0, 1,
>> + "kontron,sl28cpld-gpio"),
>> + OF_MFD_CELL("sl28cpld-gpo", sl28cpld_gpo_resources, NULL, 0, 0,
>> + "kontron,sl28cpld-gpo"),
>> + OF_MFD_CELL("sl28cpld-gpi", sl28cpld_gpi_resources, NULL, 0, 0,
>> + "kontron,sl28cpld-gpi"),
>> + OF_MFD_CELL("sl28cpld-intc", sl28cpld_intc_resources, NULL, 0, 0,
>> + "kontron,sl28cpld-intc"),
>> +};
>> +
>> +static int sl28cpld_probe(struct i2c_client *i2c)
>> +{
>> + struct sl28cpld *sl28cpld;
>> + struct device *dev = &i2c->dev;
>> + unsigned int cpld_version;
>> + int ret;
>> +
>> + sl28cpld = devm_kzalloc(dev, sizeof(*sl28cpld), GFP_KERNEL);
>> + if (!sl28cpld)
>> + return -ENOMEM;
>> +
>> + sl28cpld->regmap = devm_regmap_init_i2c(i2c,
>> &sl28cpld_regmap_config);
>> + if (IS_ERR(sl28cpld->regmap))
>> + return PTR_ERR(sl28cpld->regmap);
>> +
>> + ret = regmap_read(sl28cpld->regmap, SL28CPLD_VERSION,
>> &cpld_version);
>> + if (ret)
>> + return ret;
>> +
>> + if (cpld_version < SL28CPLD_MIN_REQ_VERSION) {
>> + dev_err(dev, "unsupported CPLD version %d\n", cpld_version);
>> + return -ENODEV;
>> + }
>> +
>> + sl28cpld->dev = dev;
>> + i2c_set_clientdata(i2c, sl28cpld);
>> +
>> + dev_info(dev, "successfully probed. CPLD version %d\n",
>> cpld_version);
>> +
>> + return devm_mfd_add_devices(dev, -1, sl28cpld_devs,
>> + ARRAY_SIZE(sl28cpld_devs), NULL,
>> + i2c->irq, NULL);
>> +}
>> +
>> +static const struct of_device_id sl28cpld_of_match[] = {
>> + { .compatible = "kontron,sl28cpld", },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, sl28cpld_of_match);
>> +
>> +static struct i2c_driver sl28cpld_driver = {
>> + .probe_new = sl28cpld_probe,
>> + .driver = {
>> + .name = "sl28cpld",
>> + .of_match_table = of_match_ptr(sl28cpld_of_match),
>> + },
>> +};
>> +module_i2c_driver(sl28cpld_driver);
>> +
>> +MODULE_DESCRIPTION("sl28cpld MFD Core Driver");
>> +MODULE_LICENSE("GPL");
>>

\
 
 \ /
  Last update: 2020-03-18 17:39    [W:0.897 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site