lkml.org 
[lkml]   [2020]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] dt-bindings: fec: document the new fsl,stop-mode property
On Wed, Mar 18, 2020 at 10:28:48AM +0100, Fuzzey, Martin wrote:
> Hi Andrew,
>
> On Wed, 18 Mar 2020 at 10:17, Andrew Lunn <andrew@lunn.ch> wrote:
> >
> > You should not be putting registers and values into device tree.
> >
> > The regmap is fine. But could you add the register and the bit to
> > fec_devtype[IMX6SX_FEC], fec_devtype[IMX6UL_FEC], etc.
> >
>
> If that's the consensus I can do it that way.
>
> But I should point out that there is already a precedent in mainline for this:
>
> Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

Hi Martin

And there are probably hundreds of emails saying don't do this.

Andrew

\
 
 \ /
  Last update: 2020-03-18 12:38    [W:0.037 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site