lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.5 126/151] pinctrl: meson-gxl: fix GPIOX sdio pins
Date
From: Nicolas Belin <nbelin@baylibre.com>

commit dc7a06b0dbbafac8623c2b7657e61362f2f479a7 upstream.

In the gxl driver, the sdio cmd and clk pins are inverted. It has not caused
any issue so far because devices using these pins always take both pins
so the resulting configuration is OK.

Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions")
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Link: https://lore.kernel.org/r/1582204512-7582-1-git-send-email-nbelin@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -147,8 +147,8 @@ static const unsigned int sdio_d0_pins[]
static const unsigned int sdio_d1_pins[] = { GPIOX_1 };
static const unsigned int sdio_d2_pins[] = { GPIOX_2 };
static const unsigned int sdio_d3_pins[] = { GPIOX_3 };
-static const unsigned int sdio_cmd_pins[] = { GPIOX_4 };
-static const unsigned int sdio_clk_pins[] = { GPIOX_5 };
+static const unsigned int sdio_clk_pins[] = { GPIOX_4 };
+static const unsigned int sdio_cmd_pins[] = { GPIOX_5 };
static const unsigned int sdio_irq_pins[] = { GPIOX_7 };

static const unsigned int nand_ce0_pins[] = { BOOT_8 };

\
 
 \ /
  Last update: 2020-03-17 12:16    [W:1.236 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site