lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/28] ARM: dts: mmp3: fix USB & USB PHY node names
Date
There are better generic ones and the validation is going to complain:

mmp3-dell-ariel.dt.yaml: hsic@f0001000: $nodename:0: 'hsic@f0001000'
does not match '^usb(@.*)?'
mmp3-dell-ariel.dt.yaml: hsic@f0002000: $nodename:0: 'hsic@f0002000'
does not match '^usb(@.*)?'
...

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp3.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index eaff9b1bc1d9f..fc75f96106351 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -183,14 +183,14 @@ hsi0_mux: interrupt-controller@d42821d0 {
mrvl,intc-nr-irqs = <5>;
};

- usb_otg_phy0: usb-otg-phy@d4207000 {
+ usb_otg_phy0: usb-phy@d4207000 {
compatible = "marvell,mmp3-usb-phy";
reg = <0xd4207000 0x40>;
#phy-cells = <0>;
status = "disabled";
};

- usb_otg0: usb-otg@d4208000 {
+ usb_otg0: usb@d4208000 {
compatible = "marvell,pxau2o-ehci";
reg = <0xd4208000 0x200>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -201,7 +201,7 @@ usb_otg0: usb-otg@d4208000 {
status = "disabled";
};

- hsic_phy0: hsic-phy@f0001800 {
+ hsic_phy0: usb-phy@f0001800 {
compatible = "marvell,mmp3-hsic-phy",
"usb-nop-xceiv";
reg = <0xf0001800 0x40>;
@@ -209,7 +209,7 @@ hsic_phy0: hsic-phy@f0001800 {
status = "disabled";
};

- hsic0: hsic@f0001000 {
+ hsic0: usb@f0001000 {
compatible = "marvell,pxau2o-ehci";
reg = <0xf0001000 0x200>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -223,7 +223,7 @@ hsic0: hsic@f0001000 {
status = "disabled";
};

- hsic_phy1: hsic-phy@f0002800 {
+ hsic_phy1: usb-phy@f0002800 {
compatible = "marvell,mmp3-hsic-phy",
"usb-nop-xceiv";
reg = <0xf0002800 0x40>;
@@ -231,7 +231,7 @@ hsic_phy1: hsic-phy@f0002800 {
status = "disabled";
};

- hsic1: hsic@f0002000 {
+ hsic1: usb@f0002000 {
compatible = "marvell,pxau2o-ehci";
reg = <0xf0002000 0x200>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1
\
 
 \ /
  Last update: 2020-03-17 10:43    [W:0.282 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site