lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RESEND PATCH 1/3] mmc: host: Introduce the request_atomic() for the host
On Tue, Mar 17, 2020 at 3:32 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 17/03/20 5:36 am, Baolin Wang wrote:
> > On Mon, Mar 16, 2020 at 9:09 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
> >>
> >> On 4/03/20 9:42 am, Baolin Wang wrote:
> >>> The SD host controller can process one request in the atomic context if
> >>> the card is nonremovable, which means we can submit next request in the
> >>> irq hard handler when using the MMC software queue to reduce the latency.
> >>> Thus this patch adds a new API request_atomic() for the host controller
> >>> and implement it for the SD host controller.
> >>>
> >>> Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
> >>> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
> >>> ---
> >>> drivers/mmc/host/sdhci.c | 27 +++++++++++++++++++--------
> >>> drivers/mmc/host/sdhci.h | 1 +
> >>> include/linux/mmc/host.h | 3 +++
> >>> 3 files changed, 23 insertions(+), 8 deletions(-)
> >>>
> >>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> >>> index 9c37451..4febbcb 100644
> >>> --- a/drivers/mmc/host/sdhci.c
> >>> +++ b/drivers/mmc/host/sdhci.c
> >>> @@ -2016,17 +2016,12 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> >>> * *
> >>> \*****************************************************************************/
> >>>
> >>> -void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> >>> +static void sdhci_start_request(struct mmc_host *mmc, struct mmc_request *mrq,
> >>> + int present)
> >>> {
> >>> - struct sdhci_host *host;
> >>> - int present;
> >>> + struct sdhci_host *host = mmc_priv(mmc);
> >>> unsigned long flags;
> >>>
> >>> - host = mmc_priv(mmc);
> >>> -
> >>> - /* Firstly check card presence */
> >>> - present = mmc->ops->get_cd(mmc);
> >>> -
> >>> spin_lock_irqsave(&host->lock, flags);
> >>>
> >>> sdhci_led_activate(host);
> >>> @@ -2043,6 +2038,22 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> >>>
> >>> spin_unlock_irqrestore(&host->lock, flags);
> >>> }
> >>> +
> >>> +void sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
> >>> +{
> >>> + sdhci_start_request(mmc, mrq, 1);
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(sdhci_request_atomic);
> >>> +
> >>> +void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> >>> +{
> >>> + int present;
> >>> +
> >>> + /* Firstly check card presence */
> >>> + present = mmc->ops->get_cd(mmc);
> >>> +
> >>> + sdhci_start_request(mmc, mrq, present);
> >>> +}
> >>> EXPORT_SYMBOL_GPL(sdhci_request);
> >>>
> >>> void sdhci_set_bus_width(struct sdhci_host *host, int width)
> >>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> >>> index cac2d97..5507a73 100644
> >>> --- a/drivers/mmc/host/sdhci.h
> >>> +++ b/drivers/mmc/host/sdhci.h
> >>> @@ -775,6 +775,7 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> >>> void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> >>> unsigned short vdd);
> >>> void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
> >>> +void sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
> >>> void sdhci_set_bus_width(struct sdhci_host *host, int width);
> >>> void sdhci_reset(struct sdhci_host *host, u8 mask);
> >>> void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> >>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> >>> index 562ed06..db5e59c 100644
> >>> --- a/include/linux/mmc/host.h
> >>> +++ b/include/linux/mmc/host.h
> >>> @@ -92,6 +92,9 @@ struct mmc_host_ops {
> >>> int err);
> >>> void (*pre_req)(struct mmc_host *host, struct mmc_request *req);
> >>> void (*request)(struct mmc_host *host, struct mmc_request *req);
> >>> + /* Submit one request to host in atomic context. */
> >>> + void (*request_atomic)(struct mmc_host *host,
> >>> + struct mmc_request *req);
> >>
> >> This doesn't have the flexibility to return "busy". For example,
> >> sdhci_send_command() will potentially wait quite some time if the inhibit
> >> bits are set. That is not good in interrupt context. It would be better to
> >> return immediately in that case and have the caller fall back to a
> >> non-atomic context. Thoughts?
> >
> > Yes, I unserstood your concern. But the sdhci_send_command() is
> > already under the spin_lock_irqsave() protection, which will also
> > disable the interrupt for some time if the inhibit bits are set. That
> > is same with moving it in interrupt context.
>
> It is, but I would like to fix that too.

OK. Like you suggested, cause we've aleady decided how to complete a
request by sdhci_defer_done(), I need think about how to change to a
non-atomic context for this unusual case.

And since the original sdhci_send_command() has the same problem as I
said, I perfer to create another patch set to fix this issue.


> > Moreover, if the previous command complete interrupt and transfer
> > complete interrupt are normal, we should not meet this issue of
> > polling inhibit bits (I have not met this issue on my platform). So I
> > think we can remove the polling here? If the inhibit bits are set, I
> > think the command complete interrupt or the transfer complete
> > interrupt have been abnormal, so we can just return the error here.
> > What do you think? Thanks.
> >
>
> I suspect the inhibit polling might be needed for some host controllers in
> some situations. ie. taking it out would likely break things.

Make sense.


--
Baolin Wang

\
 
 \ /
  Last update: 2020-03-17 10:19    [W:0.067 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site