lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v4 01/11] phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy
Date
The phy-gmii-sel can be only auto selected in Kconfig and now the pretty
complex Kconfig dependencies are defined for phy-gmii-sel driver, which
also need to be updated every time phy-gmii-sel is re-used for any new
networking driver.

Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all
dependencies and from networking drivers and rely on using 'imply
PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/net/ethernet/ti/Kconfig | 1 +
drivers/phy/ti/Kconfig | 3 ---
2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index bf98e0fa7d8b..8a6ca16eee3b 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -53,6 +53,7 @@ config TI_CPSW
select MFD_SYSCON
select PAGE_POOL
select REGMAP
+ imply PHY_TI_GMII_SEL
---help---
This driver supports TI's CPSW Ethernet Switch.

diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 6dbe9d0b9ff3..15a3bcf32308 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -106,11 +106,8 @@ config TWL4030_USB

config PHY_TI_GMII_SEL
tristate
- default y if TI_CPSW=y || TI_CPSW_SWITCHDEV=y
- depends on TI_CPSW || TI_CPSW_SWITCHDEV || COMPILE_TEST
select GENERIC_PHY
select REGMAP
- default m
help
This driver supports configuring of the TI CPSW Port mode depending on
the Ethernet PHY connected to the CPSW Port.
--
2.17.1
\
 
 \ /
  Last update: 2020-03-17 08:29    [W:1.500 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site