lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] mtd: nand: spi: rework detect procedure for different read id op
Hi Chuanhong,

Miquel Raynal <miquel.raynal@bootlin.com> wrote on Tue, 10 Mar 2020
19:33:38 +0100:

> On Sat, 2020-02-08 at 07:43:50 UTC, Chuanhong Guo wrote:
> > Currently there are 3 different variants of read_id implementation:
> > 1. opcode only. Found in GD5FxGQ4xF.
> > 2. opcode + 1 addr byte. Found in GD5GxGQ4xA/E
> > 3. opcode + 1 dummy byte. Found in other currently supported chips.
> >
> > Original implementation was for variant 1 and let detect function
> > of chips with variant 2 and 3 to ignore the first byte. This isn't
> > robust:
> >
> > 1. For chips of variant 2, if SPI master doesn't keep MOSI low
> > during read, chip will get a random id offset, and the entire id
> > buffer will shift by that offset, causing detect failure.
> >
> > 2. For chips of variant 1, if it happens to get a devid that equals
> > to manufacture id of variant 2 or 3 chips, it'll get incorrectly
> > detected.
> >
> > This patch reworks detect procedure to address problems above. New
> > logic do detection for all variants separatedly, in 1-2-3 order.
> > Since all current detect methods do exactly the same id matching
> > procedure, unify them into core.c and remove detect method from
> > manufacture_ops.
> >
> > Tested on GD5F1GQ4UAYIG and W25N01GVZEIG.
> >
> > Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
>
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

I also changed the prefix to "mtd: spinand:".

Thanks,
Miquèl

\
 
 \ /
  Last update: 2020-03-11 08:20    [W:0.027 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site