lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 096/126] usb: core: port: do error out if usb_autopm_get_interface() fails
Date
From: Eugeniu Rosca <erosca@de.adit-jv.com>

commit 1f8b39bc99a31759e97a0428a5c3f64802c1e61d upstream.

Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:

On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
> A revised search finds line 997 in drivers/usb/core/hub.c and lines
> 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any
> other directories.) AFAICT all three of these should check the
> return value, although a error message in the kernel log probably
> isn't needed.

Factor out the usb_port_runtime_{resume,suspend}() changes into a
standalone patch to allow conflict-free porting on top of stable v3.9+.

[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org

Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device")
Cc: stable@vger.kernel.org # v3.9+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200226175036.14946-3-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/core/port.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -179,7 +179,10 @@ static int usb_port_runtime_resume(struc
if (!port_dev->is_superspeed && peer)
pm_runtime_get_sync(&peer->dev);

- usb_autopm_get_interface(intf);
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ return retval;
+
retval = usb_hub_set_port_power(hdev, hub, port1, true);
msleep(hub_power_on_good_delay(hub));
if (udev && !retval) {
@@ -232,7 +235,10 @@ static int usb_port_runtime_suspend(stru
if (usb_port_block_power_off)
return -EBUSY;

- usb_autopm_get_interface(intf);
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ return retval;
+
retval = usb_hub_set_port_power(hdev, hub, port1, false);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
if (!port_dev->is_superspeed)

\
 
 \ /
  Last update: 2020-03-10 14:19    [W:0.376 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site