lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.5 173/189] ARM: dts: am437x-idk-evm: Fix incorrect OPP node names
    Date
    From: Suman Anna <s-anna@ti.com>

    commit 31623468be0bf57617b8057dcd335693935a9491 upstream.

    The commit 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable
    OPP50 for MPU") adjusts couple of OPP nodes defined in the
    common am4372.dtsi file, but used outdated node names. This
    results in these getting treated as new OPP nodes with missing
    properties.

    Fix this properly by using the correct node names as updated in
    commit b9cb2ba71848 ("ARM: dts: Use - instead of @ for DT OPP
    entries for TI SoCs").

    Reported-by: Roger Quadros <rogerq@ti.com>
    Fixes: 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU")
    Signed-off-by: Suman Anna <s-anna@ti.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    ---
    arch/arm/boot/dts/am437x-idk-evm.dts | 4 ++--
    1 file changed, 2 insertions(+), 2 deletions(-)

    --- a/arch/arm/boot/dts/am437x-idk-evm.dts
    +++ b/arch/arm/boot/dts/am437x-idk-evm.dts
    @@ -526,11 +526,11 @@
    * Supply voltage supervisor on board will not allow opp50 so
    * disable it and set opp100 as suspend OPP.
    */
    - opp50@300000000 {
    + opp50-300000000 {
    status = "disabled";
    };

    - opp100@600000000 {
    + opp100-600000000 {
    opp-suspend;
    };
    };

    \
     
     \ /
      Last update: 2020-03-10 14:06    [W:4.355 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site