lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] powerpc/watchpoint: Don't call dar_within_range() for Book3S
Date
On Sat, 2020-02-22 at 08:20:49 UTC, Ravi Bangoria wrote:
> DAR is set to the first byte of overlap between actual access and
> watched range at DSI on Book3S processor. But actual access range
> might or might not be within user asked range. So for Book3S, it
> must not call dar_within_range().
>
> This revert portion of commit 39413ae00967 ("powerpc/hw_breakpoints:
> Rewrite 8xx breakpoints to allow any address range size.").
>
> Before patch:
> # ./tools/testing/selftests/powerpc/ptrace/perf-hwbreak
> ...
> TESTED: No overlap
> FAILED: Partial overlap: 0 != 2
> TESTED: Partial overlap
> TESTED: No overlap
> FAILED: Full overlap: 0 != 2
> failure: perf_hwbreak
>
> After patch:
> TESTED: No overlap
> TESTED: Partial overlap
> TESTED: Partial overlap
> TESTED: No overlap
> TESTED: Full overlap
> success: perf_hwbreak
>
> Fixes: 39413ae00967 ("powerpc/hw_breakpoints: Rewrite 8xx breakpoints to allow any address range size.")
> Reported-by: Michael Ellerman <mpe@ellerman.id.au>
> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>

Applied to powerpc fixes, thanks.

https://git.kernel.org/powerpc/c/e08658a657f974590809290c62e889f0fd420200

cheers

\
 
 \ /
  Last update: 2020-02-27 13:31    [W:0.052 / U:2.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site