lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/7] ARM: dts: aspeed-g6: add usb functions
On Thu, 27 Feb 2020 at 04:10, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
>
> On Wed, 2020-02-26 at 15:03 -0800, rentao.bupt@gmail.com wrote:
> > From: Tao Ren <rentao.bupt@gmail.com>
> >
> > Add USB components and according pin groups in aspeed-g6 dtsi.
> >
> > Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
> > Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Reviewed-by: Joel Stanley <joel@jms.id.au>

I will take this patch through the aspeed tree for 5.7.

Cheers,

Joel


>
> > ---
> > No change in v3/v4.
> > Changes in v2:
> > - added port/endpoint properties for vhub dt node.
> >
> > arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 25 +++++++++++++
> > arch/arm/boot/dts/aspeed-g6.dtsi | 45
> > ++++++++++++++++++++++++
> > 2 files changed, 70 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > index 045ce66ca876..7028e21bdd98 100644
> > --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
> > @@ -1112,6 +1112,31 @@
> > groups = "UART9";
> > };
> >
> > + pinctrl_usb2ah_default: usb2ah_default {
> > + function = "USB2AH";
> > + groups = "USBA";
> > + };
> > +
> > + pinctrl_usb2ad_default: usb2ad_default {
> > + function = "USB2AD";
> > + groups = "USBA";
> > + };
> > +
> > + pinctrl_usb2bh_default: usb2bh_default {
> > + function = "USB2BH";
> > + groups = "USBB";
> > + };
> > +
> > + pinctrl_usb2bd_default: usb2bd_default {
> > + function = "USB2BD";
> > + groups = "USBB";
> > + };
> > +
> > + pinctrl_usb11bhid_default: usb11bhid_default {
> > + function = "USB11BHID";
> > + groups = "USBB";
> > + };
> > +
> > pinctrl_vb_default: vb_default {
> > function = "VB";
> > groups = "VB";
> > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
> > b/arch/arm/boot/dts/aspeed-g6.dtsi
> > index 796976d275e1..0a29b3b57a9d 100644
> > --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> > @@ -245,6 +245,51 @@
> > status = "disabled";
> > };
> >
> > + ehci0: usb@1e6a1000 {
> > + compatible = "aspeed,ast2600-ehci", "generic-
> > ehci";
> > + reg = <0x1e6a1000 0x100>;
> > + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb2ah_default>;
> > + status = "disabled";
> > + };
> > +
> > + ehci1: usb@1e6a3000 {
> > + compatible = "aspeed,ast2600-ehci", "generic-
> > ehci";
> > + reg = <0x1e6a3000 0x100>;
> > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb2bh_default>;
> > + status = "disabled";
> > + };
> > +
> > + uhci: usb@1e6b0000 {
> > + compatible = "aspeed,ast2600-uhci", "generic-
> > uhci";
> > + reg = <0x1e6b0000 0x100>;
> > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> > + #ports = <2>;
> > + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
> > + status = "disabled";
> > + /*
> > + * No default pinmux, it will follow EHCI, use
> > an
> > + * explicit pinmux override if EHCI is not
> > enabled.
> > + */
> > + };
> > +
> > + vhub: usb-vhub@1e6a0000 {
> > + compatible = "aspeed,ast2600-usb-vhub";
> > + reg = <0x1e6a0000 0x350>;
> > + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> > + aspeed,vhub-downstream-ports = <7>;
> > + aspeed,vhub-generic-endpoints = <21>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb2ad_default>;
> > + status = "disabled";
> > + };
> > +
> > apb {
> > compatible = "simple-bus";
> > #address-cells = <1>;
>

\
 
 \ /
  Last update: 2020-02-27 06:57    [W:0.063 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site