lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFT PATCH 4/4] usb: dwc2: Make "trimming xfer length" a debug message
On Thu, Feb 27, 2020 at 02:07:14PM -0800, Doug Anderson wrote:
> Hi,
>
> On Wed, Feb 26, 2020 at 1:04 PM Guenter Roeck <linux@roeck-us.net> wrote:
> >
> > With some USB network adapters, such as DM96xx, the following message
> > is seen for each maximum size receive packet.
> >
> > dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length
> >
> > This happens because the packet size requested by the driver is 1522
> > bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to
> > receive 24*64 = 1536 bytes, and the chip does indeed send more than
> > 1522 bytes of data. Since the event does not indicate an error condition,
> > the message is just noise. Demote it to debug level.
> >
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> > ---
> > drivers/usb/dwc2/hcd_intr.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Suggest a "Fixes" or "Cc: stable" tag. This one isn't as important as
> the others, but presumably you'll start hitting it a lot more now
> (whereas previously we'd just crash).
>
Good point. Added

Fixes: 7359d482eb4d3 ("staging: HCD files for the DWC2 driver")

> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Thanks again!

Guenter

\
 
 \ /
  Last update: 2020-02-28 01:40    [W:0.297 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site