lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [PATCH v4 2/5] mtd: spinand: micron: Add new Micron SPI NAND devices
Date
Hi Boris,

Thanks for the review.

>
> On Thu, 6 Feb 2020 21:22:03 +0100
> shiva.linuxworks@gmail.com wrote:
>
> > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> >
> > Add device table for M79A and M78A series Micron SPI NAND devices.
> >
> > Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> > ---
> > drivers/mtd/nand/spi/micron.c | 31
> +++++++++++++++++++++++++++++++
> > 1 file changed, 31 insertions(+)
> >
> > diff --git a/drivers/mtd/nand/spi/micron.c
> b/drivers/mtd/nand/spi/micron.c
> > index c028d0d7e236..5fd1f921ef12 100644
> > --- a/drivers/mtd/nand/spi/micron.c
> > +++ b/drivers/mtd/nand/spi/micron.c
> > @@ -91,6 +91,7 @@ static int micron_8_ecc_get_status(struct
> spinand_device *spinand,
> > }
> >
> > static const struct spinand_info micron_spinand_table[] = {
> > + /* M79A 2Gb 3.3V */
>
> Should be added in a separate patch.

Okay, I will create separate patch for each device.

>
> > SPINAND_INFO("MT29F2G01ABAGD", 0x24,
> > NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
> > NAND_ECCREQ(8, 512),
> > @@ -100,6 +101,36 @@ static const struct spinand_info
> micron_spinand_table[] = {
> > 0,
> > SPINAND_ECCINFO(&micron_8_ooblayout,
> > micron_8_ecc_get_status)),
> > + /* M79A 2Gb 1.8V */
> > + SPINAND_INFO("MT29F2G01ABBGD", 0x25,
> > + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
> > + NAND_ECCREQ(8, 512),
> > + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> > + &write_cache_variants,
> > + &update_cache_variants),
> > + 0,
> > + SPINAND_ECCINFO(&micron_8_ooblayout,
> > + micron_8_ecc_get_status)),
> > + /* M78A 1Gb 3.3V */
> > + SPINAND_INFO("MT29F1G01ABAFD", 0x14,
> > + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> > + NAND_ECCREQ(8, 512),
> > + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> > + &write_cache_variants,
> > + &update_cache_variants),
> > + 0,
> > + SPINAND_ECCINFO(&micron_8_ooblayout,
> > + micron_8_ecc_get_status)),
> > + /* M78A 1Gb 1.8V */
> > + SPINAND_INFO("MT29F1G01ABAFD", 0x15,
> > + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> > + NAND_ECCREQ(8, 512),
> > + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> > + &write_cache_variants,
> > + &update_cache_variants),
> > + 0,
> > + SPINAND_ECCINFO(&micron_8_ooblayout,
> > + micron_8_ecc_get_status)),
> > };
> >
> > static int micron_spinand_detect(struct spinand_device *spinand)

\
 
 \ /
  Last update: 2020-02-27 21:17    [W:0.058 / U:1.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site