lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding
From
Date
On 2/24/20 1:06 AM, Maxime Ripard wrote:
> The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
> EDID. This block is split into two parts, the BSC and the AUTO_I2C,
> lying in two separate register areas.
>
> The AUTO_I2C block has a mailbox-like interface and will take away the
> BSC control from the CPU if enabled. However, the BSC is the actually
> the same controller than the one supported by the brcmstb driver, and
> the AUTO_I2C doesn't really bring any immediate benefit.
>
> We can model it in the DT as a single device with two register range,
> which will allow us to use or or the other in the driver without
> changing anything in the DT.
>
> Cc: Kamal Dasu <kdasu.kdev@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Cc: linux-i2c@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian

\
 
 \ /
  Last update: 2020-02-24 18:48    [W:0.444 / U:1.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site