lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCHv10 12/13] arm64: dts: lx2160a: Add PCIe controller DT nodes
Date
Hi Shawn,


> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: 2020年2月24日 9:28
> To: Z.q. Hou <zhiqiang.hou@nxp.com>
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> bhelgaas@google.com; robh+dt@kernel.org; andrew.murray@arm.com;
> arnd@arndb.de; mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in;
> m.karthikeyan@mobiveil.co.in; Leo Li <leoyang.li@nxp.com>;
> lorenzo.pieralisi@arm.com; catalin.marinas@arm.com;
> will.deacon@arm.com; Mingkai Hu <mingkai.hu@nxp.com>; M.h. Lian
> <minghuan.lian@nxp.com>; Xiaowei Bao <xiaowei.bao@nxp.com>
> Subject: Re: [PATCHv10 12/13] arm64: dts: lx2160a: Add PCIe controller DT
> nodes
>
> On Thu, Feb 13, 2020 at 12:06:43PM +0800, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > The LX2160A integrated 6 PCIe Gen4 controllers.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> > ---
> > V10:
> > - No change
> >
> > .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 163
> > ++++++++++++++++++
> > 1 file changed, 163 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > index e5ee5591e52b..aee2810d91cc 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > @@ -1076,5 +1076,168 @@
> > };
> > };
> > };
> > +
> > + pcie@3400000 {
>
> The nodes should be sorted in unit-address. That said, they should be
> added after ata3: sata@3230000.
>
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03400000 0x0 0x00100000 /* controller
> registers */
> > + 0x80 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 110
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 111
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 112
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3500000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03500000 0x0 0x00100000 /* controller
> registers */
> > + 0x88 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 115
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 116
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 117
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3600000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03600000 0x0 0x00100000 /* controller
> registers */
> > + 0x90 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <256>;
> > + ppio-wins = <24>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 120
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 121
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 122
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3700000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03700000 0x0 0x00100000 /* controller
> registers */
> > + 0x98 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 125
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 126
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 127
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3800000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03800000 0x0 0x00100000 /* controller
> registers */
> > + 0xa0 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <256>;
> > + ppio-wins = <24>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 130
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 131
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 132
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
> > + pcie@3900000 {
> > + compatible = "fsl,lx2160a-pcie";
> > + reg = <0x00 0x03900000 0x0 0x00100000 /* controller
> registers */
> > + 0xa8 0x00000000 0x0 0x00001000>; /* configuration
> space */
> > + reg-names = "csr_axi_slave", "config_axi_slave";
> > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME
> interrupt */
> > + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > + interrupt-names = "aer", "pme", "intr";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + apio-wins = <8>;
> > + ppio-wins = <8>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 GIC_SPI 105
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 GIC_SPI 106
> IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 GIC_SPI 107
> IRQ_TYPE_LEVEL_HIGH>;
> > + status = "disabled";
> > + };
> > +
>
> Unnecessary newline.
>
> I fixed them up and applied the patch.

Thanks a lot for your help!

Thanks,
Zhiqiang

>
> Shawn
>
> > };
> > };
> > --
> > 2.17.1
> >
\
 
 \ /
  Last update: 2020-02-24 07:12    [W:0.117 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site