lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads
On Fri, Feb 21, 2020 at 09:27:26PM +0100, Ondrej Jirman wrote:
> When doing a 16-bit read that returns data in the MSB byte, the
> RSB_DATA register will keep the MSB byte unchanged when doing
> the following 8-bit read. sunxi_rsb_read() will then return
> a result that contains high byte from 16-bit read mixed with
> the 8-bit result.
>
> The consequence is that after this happens the PMIC's regmap will
> look like this: (0x33 is the high byte from the 16-bit read)
>
> % cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers
> 00: 33
> 01: 33
> 02: 33
> 03: 33
> 04: 33
> 05: 33
> 06: 33
> 07: 33
> 08: 33
> 09: 33
> 0a: 33
> 0b: 33
> 0c: 33
> 0d: 33
> 0e: 33
> [snip]
>
> Fix this by masking the result of the read with the correct mask
> based on the size of the read. There are no 16-bit users in the
> mainline kernel, so this doesn't need to get into the stable tree.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Acked-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-02-24 12:03    [W:0.029 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site