lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Query on device links
From
Date
On 22/02/2020 06:55, Saravana Kannan wrote:
> On Thu, Feb 6, 2020 at 2:32 AM John Garry <john.garry@huawei.com> wrote:
>>
>> Hi guys,
>
> Sorry it took a while to get back.

no worries, it may have seemed a daft question

>
>>
>> According to "Limitations" section @
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/driver-api/device_link.rst#n110,
>> for a managed link, lack of the supplier driver may cause indefinite
>> delay in probing of the consumer. Is there any way around this?
>
> Currently, no. There's no way to guarantee ordering AND ignore
> supplier failures.
>
>> So I just want the probe order attempt of the supplier and consumer to
>> be guaranteed, but the supplier probe may not be successful, i.e. does
>> not actually bind.
>>
>> In my case, I would like to use device_link_add(supplier, consumer,
>> DL_FLAG_AUTOPROBE_CONSUMER), but I find the supplier probe may fail (and
>> not due to -EPROBE_DEFER), and my consumer remains in limbo.
>
> The requirements seem to contradict each other. If you depend on the
> supplier, how can you probe the consumer if the supplier fails?

In fact, I now consider what I was attempting to be a hack and not the
proper solution to the problem.

So we assign an IOMMU group to a device in the really_probe() dma
configure, which I required to be in order.

However the proper approach may now be to take the device iommu group
assignment outside the device driver probe path, and not consider device
links as the solution or any such device driver probe ordering.

>
>> You may ask my I want this ordering at all - it is because in
>> really_probe(), we do the device DMA configure before the actual device
>> driver probe, and I just need that ordering to be ensured between devices.
>
> I'm assuming the supplier in your case is the "dma device" (is it an
> iommu?)?

No, just 2 PCI devices, the port and an end device.

So if it fails, how is your consumer probing without the
> supplier? I'd think something like a DMA would be fundamental?
>
> Why can't this logic be handled in your consumer driver instead of
> using device links?

Yes, I did try something like this, but, again, it just looks like the
IOMMU group device assignment needs rework.

Why can't your consumer driver return
> -EPROBE_DEFER if the dma ops are not set up correctly until some point
> after which (after late_initcall?) the consumer will continue probing
> without returning -EPROBE_DEFER even if the supplier isn't there/dma
> ops aren't set up? >
> Can you give a more concrete example of your devices? Or why the
> suggestion above might not work?

As above.

Please note that we still may want to use device links for ensuring
probe ordering of the DMA device and the IOMMU, but this is not a
specifically related issue.

Much appreciated,
john

\
 
 \ /
  Last update: 2020-02-24 11:05    [W:0.034 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site