lkml.org 
[lkml]   [2020]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: sun8i-h3: Add thermal trip points/cooling maps
Hello,

On Sun, Feb 23, 2020 at 11:29:31AM +0800, Chen-Yu Tsai wrote:
> On Sun, Feb 23, 2020 at 5:42 AM Ondrej Jirman <megous@megous.com> wrote:
> >
> > This enables passive cooling by down-regulating CPU voltage
> > and frequency.
>
>
> Please state for the record how the trip points were derived. Were they from
> the BSP? Or the user manual?

I used a slightly lowered value from the BSP code. 110 seemed like a lot for
the critical temp. So I rounded it off to 100°C.

https://megous.com/git/linux/tree/drivers/thermal/sunxi-temperature.c?h=a83t-3.4-bsp-tbs-a711#n1139

H3 lists the same recommended ambient temperature range as A83T. -20 to 70 °C.

regards,
o.

> ChenYu
>
> > Signed-off-by: Ondrej Jirman <megous@megous.com>

\
 
 \ /
  Last update: 2020-02-23 11:17    [W:0.035 / U:1.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site