lkml.org 
[lkml]   [2020]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
From
Date
On 2/21/20 9:31 AM, Faiz Abbas wrote:
> Hi Rob,
>
> On 20/02/20 2:05 am, Rob Herring wrote:
>> On Mon, Feb 17, 2020 at 07:58:34PM +0530, Faiz Abbas wrote:
>>> Some CAN transceivers have a standby line that needs to be asserted
>>> before they can be used. Model this GPIO lines as an optional
>>> fixed-regulator node. Document bindings for the same.
>>>
>>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>>> ---
>>> Documentation/devicetree/bindings/net/can/m_can.txt | 3 +++
>>> 1 file changed, 3 insertions(+)
>>
>> This has moved to DT schema in my tree, so please adjust it and resend.
>
> Ok.
>>
>>> diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
>>> index ed614383af9c..f17e2a5207dc 100644
>>> --- a/Documentation/devicetree/bindings/net/can/m_can.txt
>>> +++ b/Documentation/devicetree/bindings/net/can/m_can.txt
>>> @@ -48,6 +48,9 @@ Optional Subnode:
>>> that can be used for CAN/CAN-FD modes. See
>>> Documentation/devicetree/bindings/net/can/can-transceiver.txt
>>> for details.
>>> +
>>> +- xceiver-supply: Regulator that powers the CAN transceiver.
>>
>> The supply for a transceiver should go in the transceiver node.
>>
>
> Marc, while I have you here, do you agree with this?

I'll look into the details later today.

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2020-02-21 09:32    [W:0.237 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site