lkml.org 
[lkml]   [2020]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V5] mfd: da9062: add support for interrupt polarity defined in device tree
On Mon, Feb 17, 2020 at 1:44 AM Shreyas Joshi <shreyas.joshi@biamp.com> wrote:

> The da9062 interrupt handler cannot necessarily be low active.
> Add a function to configure the interrupt type based on what is defined in the device tree.
> The allowable interrupt type is either low or high level trigger.
>
> Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>

This is how I imagine it must work and how I implemented this
kind of stuff in the past.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2020-02-21 15:23    [W:0.155 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site