lkml.org 
[lkml]   [2020]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.5 088/399] rtw88: fix rate mask for 1SS chip
Date
From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 35a68fa5f96a80797e11b6952a47c5a84939a7bf ]

The rate mask is used to tell firmware the supported rate depends on
negotiation. We loop 2 times for all VHT/HT 2SS rate mask first, and then
only keep the part according to chip's NSS.

This commit fixes the logic error of '&' operations for VHT/HT rate, and
we should run this logic before adding legacy rate.

To access HT MCS map, index 0/1 represent MCS 0-7/8-15 respectively. Use
NL80211_BAND_xxx is incorrect, so fix it as well.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw88/main.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index ae61415e16654..f369ddca953af 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -706,8 +706,8 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
if (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80)
is_support_sgi = true;
} else if (sta->ht_cap.ht_supported) {
- ra_mask |= (sta->ht_cap.mcs.rx_mask[NL80211_BAND_5GHZ] << 20) |
- (sta->ht_cap.mcs.rx_mask[NL80211_BAND_2GHZ] << 12);
+ ra_mask |= (sta->ht_cap.mcs.rx_mask[1] << 20) |
+ (sta->ht_cap.mcs.rx_mask[0] << 12);
if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
stbc_en = HT_STBC_EN;
if (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING)
@@ -717,6 +717,9 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
is_support_sgi = true;
}

+ if (efuse->hw_cap.nss == 1)
+ ra_mask &= RA_MASK_VHT_RATES_1SS | RA_MASK_HT_RATES_1SS;
+
if (hal->current_band_type == RTW_BAND_5G) {
ra_mask |= (u64)sta->supp_rates[NL80211_BAND_5GHZ] << 4;
if (sta->vht_cap.vht_supported) {
@@ -750,11 +753,6 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
wireless_set = 0;
}

- if (efuse->hw_cap.nss == 1) {
- ra_mask &= RA_MASK_VHT_RATES_1SS;
- ra_mask &= RA_MASK_HT_RATES_1SS;
- }
-
switch (sta->bandwidth) {
case IEEE80211_STA_RX_BW_80:
bw_mode = RTW_CHANNEL_WIDTH_80;
--
2.20.1


\
 
 \ /
  Last update: 2020-02-21 08:48    [W:0.775 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site