lkml.org 
[lkml]   [2020]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 09/15] remoteproc: Introduce function rproc_detach()
On Tue, Dec 08, 2020 at 07:35:18PM +0100, Arnaud POULIQUEN wrote:
> Hi Mathieu,
>
>
> On 11/26/20 10:06 PM, Mathieu Poirier wrote:
> > Introduce function rproc_detach() to enable the remoteproc
> > core to release the resources associated with a remote processor
> > without stopping its operation.
> >
> > Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> > Reviewed-by: Peng Fan <peng.fan@nxp.com>
> > ---
> > drivers/remoteproc/remoteproc_core.c | 65 +++++++++++++++++++++++++++-
> > include/linux/remoteproc.h | 1 +
> > 2 files changed, 65 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> > index 928b3f975798..f5adf05762e9 100644
> > --- a/drivers/remoteproc/remoteproc_core.c
> > +++ b/drivers/remoteproc/remoteproc_core.c
> > @@ -1667,7 +1667,7 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
> > /*
> > * __rproc_detach(): Does the opposite of rproc_attach()
> > */
> > -static int __maybe_unused __rproc_detach(struct rproc *rproc)
> > +static int __rproc_detach(struct rproc *rproc)
> > {
> > struct device *dev = &rproc->dev;
> > int ret;
> > @@ -1910,6 +1910,69 @@ void rproc_shutdown(struct rproc *rproc)
> > }
> > EXPORT_SYMBOL(rproc_shutdown);
> >
> > +/**
> > + * rproc_detach() - Detach the remote processor from the
> > + * remoteproc core
> > + *
> > + * @rproc: the remote processor
> > + *
> > + * Detach a remote processor (previously attached to with rproc_actuate()).
> > + *
> > + * In case @rproc is still being used by an additional user(s), then
> > + * this function will just decrement the power refcount and exit,
> > + * without disconnecting the device.
> > + *
> > + * Function rproc_detach() calls __rproc_detach() in order to let a remote
> > + * processor know that services provided by the application processor are
> > + * no longer available. From there it should be possible to remove the
> > + * platform driver and even power cycle the application processor (if the HW
> > + * supports it) without needing to switch off the remote processor.
> > + */
> > +int rproc_detach(struct rproc *rproc)
> > +{
> > + struct device *dev = &rproc->dev;
> > + int ret;
> > +
> > + ret = mutex_lock_interruptible(&rproc->lock);
> > + if (ret) {
> > + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, ret);
> > + return ret;
> > + }
> > +
> > + if (rproc->state != RPROC_RUNNING && rproc->state != RPROC_ATTACHED) {
> > + ret = -EPERM;
> > + goto out;
> > + }
> > +
> > + /* if the remote proc is still needed, bail out */
> > + if (!atomic_dec_and_test(&rproc->power)) {
> > + ret = -EBUSY;
> > + goto out;
> > + }
> > +
> > + ret = __rproc_detach(rproc);
> > + if (ret) {
> > + atomic_inc(&rproc->power);
> > + goto out;
> > + }
> > +
> > + /* clean up all acquired resources */
> > + rproc_resource_cleanup(rproc);
>
> I started to test the series, I found 2 problems testing in STM32P1 board.
>
> 1) the resource_table pointer is unmapped if the firmware has been booted by the
> Linux, generating a crash in rproc_free_vring.
> I attached a fix at the end of the mail.
>
> 2) After the detach, the rproc state is "detached"
> but it is no longer possible to re-attach to it correctly.
> Neither if the firmware is standalone, nor if it has been booted
> by the Linux.

Thanks for the report - I thought both problems had been fixed...

>
> I did not investigate, but the issue is probably linked to the resource
> table address which is set to NULL.
>
> So we either have to fix the problem in order to attach or forbid the transition.
>

Perfect timing on your side as I was contemplating sending another revision.
Let me look at things and I will get back to you.

>
> Regards,
> Arnaud
>
> > +
> > + rproc_disable_iommu(rproc);
> > +
> > + /*
> > + * Set the remote processor's table pointer to NULL. Since mapping
> > + * of the resource table to a virtual address is done in the platform
> > + * driver, unmapping should also be done there.
> > + */
> > + rproc->table_ptr = NULL;
> > +out:
> > + mutex_unlock(&rproc->lock);
> > + return ret;
> > +}
> > +EXPORT_SYMBOL(rproc_detach);
> > +
> > /**
> > * rproc_get_by_phandle() - find a remote processor by phandle
> > * @phandle: phandle to the rproc
> > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> > index da15b77583d3..329c1c071dcf 100644
> > --- a/include/linux/remoteproc.h
> > +++ b/include/linux/remoteproc.h
> > @@ -656,6 +656,7 @@ rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len,
> >
> > int rproc_boot(struct rproc *rproc);
> > void rproc_shutdown(struct rproc *rproc);
> > +int rproc_detach(struct rproc *rproc);
> > int rproc_set_firmware(struct rproc *rproc, const char *fw_name);
> > void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type);
> > int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size);
> >
>
> From: Arnaud Pouliquen <arnaud.pouliquen@foss-st.com>
> Date: Tue, 8 Dec 2020 18:54:51 +0100
> Subject: [PATCH] remoteproc: core: fix detach for unmapped table_ptr
>
> If the firmware has been loaded and started by the kernel, the
> resource table has probably been mapped by the carveout allocation
> (see rproc_elf_find_loaded_rsc_table).
> In this case the memory can have been unmapped before the vrings are free.
> The result is a crash that occurs in rproc_free_vring while try to use the
> unmapped pointer.
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss-st.com>
> ---
> drivers/remoteproc/remoteproc_core.c | 17 ++++++++++++++---
> 1 file changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c
> b/drivers/remoteproc/remoteproc_core.c
> index 2b0a52fb3398..3508ffba4a2a 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -1964,6 +1964,13 @@ int rproc_detach(struct rproc *rproc)
> goto out;
> }
>
> + /*
> + * Prevent case that the installed resource table is no longer
> + * accessible (e.g. memory unmapped), use the cache if available
> + */
> + if (rproc->cached_table)
> + rproc->table_ptr = rproc->cached_table;
> +
> ret = __rproc_detach(rproc);
> if (ret) {
> atomic_inc(&rproc->power);
> @@ -1975,10 +1982,14 @@ int rproc_detach(struct rproc *rproc)
>
> rproc_disable_iommu(rproc);
>
> + /* Free the chached table memory that can has been allocated*/
> + kfree(rproc->cached_table);
> + rproc->cached_table = NULL;
> /*
> - * Set the remote processor's table pointer to NULL. Since mapping
> - * of the resource table to a virtual address is done in the platform
> - * driver, unmapping should also be done there.
> + * Set the remote processor's table pointer to NULL. If mapping
> + * of the resource table to a virtual address has been done in the
> + * platform driver(attachment to an existing firmware),
> + * unmapping should also be done there.
> */
> rproc->table_ptr = NULL;
> out:
> --
> 2.17.1
>
>
>

\
 
 \ /
  Last update: 2020-12-08 21:39    [W:0.152 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site