lkml.org 
[lkml]   [2020]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [linux-sunxi] [PATCH 8/8] arm64: dts: allwinner: Add OrangePi Zero 2 .dts
    Hi Andre,

    On Wed, 2 Dec 2020 at 14:54, Andre Przywara <andre.przywara@arm.com> wrote:
    >
    > The OrangePi Zero 2 is a development board with the new H616 SoC.
    >
    > It features the usual connectors used on those small boards, and comes
    > with the AXP305, which seems to be compatible with the AXP805.
    >
    > For more details see: http://linux-sunxi.org/Xunlong_Orange_Pi_Zero2
    >
    > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
    > ---
    > arch/arm64/boot/dts/allwinner/Makefile | 1 +
    > .../allwinner/sun50i-h616-orangepi-zero2.dts | 228 ++++++++++++++++++
    > 2 files changed, 229 insertions(+)
    > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
    >
    > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
    > index 211d1e9d4701..0cf8299b1ce7 100644
    > --- a/arch/arm64/boot/dts/allwinner/Makefile
    > +++ b/arch/arm64/boot/dts/allwinner/Makefile
    > @@ -35,3 +35,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
    > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
    > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
    > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
    > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
    > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
    > new file mode 100644
    > index 000000000000..814f5b4fec7c
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
    > @@ -0,0 +1,228 @@
    > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
    > +/*
    > + * Copyright (C) 2020 Arm Ltd.
    > + */
    > +
    > +/dts-v1/;
    > +
    > +#include "sun50i-h616.dtsi"
    > +
    > +#include <dt-bindings/gpio/gpio.h>
    > +#include <dt-bindings/interrupt-controller/arm-gic.h>
    > +
    > +/ {
    > + model = "OrangePi Zero2";
    > + compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";

    You need to add this compatible to the sunxi.yaml boards list

    > +
    > + aliases {
    > + ethernet0 = &emac0;
    > + serial0 = &uart0;
    > + };
    > +
    > + chosen {
    > + stdout-path = "serial0:115200n8";
    > + };
    > +
    > + leds {
    > + compatible = "gpio-leds";
    > +
    > + power {
    > + label = "orangepi:red:power";

    label is deprecated
    function = LED_FUNCTION_POWER;
    color = <LED_COLOR_ID_RED>;

    > + gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
    > + default-state = "on";
    > + };
    > +
    > + status {
    > + label = "orangepi:green:status";

    same here
    function = LED_FUNCTION_STATUS;
    color = <LED_COLOR_ID_GREEN>;

    > + gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
    > + };
    > + };
    > +
    > + reg_vcc5v: vcc5v {
    > + /* board wide 5V supply directly from the USB-C socket */
    > + compatible = "regulator-fixed";
    > + regulator-name = "vcc-5v";
    > + regulator-min-microvolt = <5000000>;
    > + regulator-max-microvolt = <5000000>;
    > + regulator-always-on;
    > + };
    > +
    > + reg_usb1_vbus: usb1-vbus {
    > + compatible = "regulator-fixed";
    > + regulator-name = "usb1-vbus";

    Could you add reg_vcc5v as vin-supply.
    This doesn't change anything but will be a better description of the HW.

    > + regulator-min-microvolt = <5000000>;
    > + regulator-max-microvolt = <5000000>;
    > + enable-active-high;
    > + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
    > + status = "okay";
    > + };
    > +};
    > +
    > +&ehci0 {
    > + status = "okay";
    > +};
    > +
    > +&ehci1 {
    > + status = "okay";
    > +};
    > +
    > +/* USB 2 & 3 are on headers only. */
    > +
    > +&emac0 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&ext_rgmii_pins>;
    > + phy-mode = "rgmii";
    > + phy-handle = <&ext_rgmii_phy>;
    > + phy-supply = <&reg_dcdce>;
    > + allwinner,rx-delay-ps = <3100>;
    > + allwinner,tx-delay-ps = <700>;
    > + status = "okay";
    > +};
    > +
    > +&mdio {
    > + ext_rgmii_phy: ethernet-phy@1 {
    > + compatible = "ethernet-phy-ieee802.3-c22";
    > + reg = <1>;
    > + };
    > +};
    > +
    > +&mmc0 {
    > + vmmc-supply = <&reg_dcdce>;
    > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
    > + bus-width = <4>;
    > + status = "okay";
    > +};
    > +
    > +&ohci0 {
    > + status = "okay";
    > +};
    > +
    > +&ohci1 {
    > + status = "okay";
    > +};
    > +
    > +&r_i2c {
    > + status = "okay";
    > +
    > + axp305: pmic@36 {
    > + compatible = "x-powers,axp305", "x-powers,axp805",
    > + "x-powers,axp806";
    > + reg = <0x36>;
    > +
    > + /* dummy interrupt to appease the driver for now */
    > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
    > + interrupt-controller;
    > + #interrupt-cells = <1>;
    > +
    > + x-powers,self-working-mode;
    > + vina-supply = <&reg_vcc5v>;
    > + vinb-supply = <&reg_vcc5v>;
    > + vinc-supply = <&reg_vcc5v>;
    > + vind-supply = <&reg_vcc5v>;
    > + vine-supply = <&reg_vcc5v>;
    > + aldoin-supply = <&reg_vcc5v>;
    > + bldoin-supply = <&reg_vcc5v>;
    > + cldoin-supply = <&reg_vcc5v>;
    > +
    > + regulators {
    > + reg_aldo1: aldo1 {
    > + regulator-always-on;
    > + regulator-min-microvolt = <3300000>;
    > + regulator-max-microvolt = <3300000>;
    > + regulator-name = "vcc-sys";
    > + };
    > +
    > + reg_aldo2: aldo2 {
    > + regulator-min-microvolt = <3300000>;
    > + regulator-max-microvolt = <3300000>;
    > + regulator-name = "vcc3v3-ext";
    > + };
    > +
    > + reg_aldo3: aldo3 {
    > + regulator-min-microvolt = <3300000>;
    > + regulator-max-microvolt = <3300000>;
    > + regulator-name = "vcc3v3-ext2";
    > + };
    > +
    > + reg_bldo1: bldo1 {
    > + regulator-always-on;
    > + regulator-min-microvolt = <1800000>;
    > + regulator-max-microvolt = <1800000>;
    > + regulator-name = "vcc1v8";
    > + };
    > +
    > + bldo2 {
    > + /* unused */
    > + };
    > +
    > + bldo3 {
    > + /* unused */
    > + };
    > +
    > + bldo4 {
    > + /* unused */
    > + };
    > +
    > + cldo1 {
    > + /* reserved */
    > + };
    > +
    > + cldo2 {
    > + /* unused */
    > + };
    > +
    > + cldo3 {
    > + /* unused */
    > + };
    > +
    > + reg_dcdca: dcdca {
    > + regulator-always-on;
    > + regulator-min-microvolt = <810000>;
    > + regulator-max-microvolt = <1080000>;
    > + regulator-name = "vdd-cpu";
    > + };
    > +
    > + reg_dcdcc: dcdcc {
    > + regulator-always-on;
    > + regulator-min-microvolt = <810000>;
    > + regulator-max-microvolt = <1080000>;
    > + regulator-name = "vdd-gpu-sys";
    > + };
    > +
    > + reg_dcdcd: dcdcd {
    > + regulator-always-on;
    > + regulator-min-microvolt = <1500000>;
    > + regulator-max-microvolt = <1500000>;
    > + regulator-name = "vdd-dram";
    > + };
    > +
    > + reg_dcdce: dcdce {
    > + regulator-boot-on;
    > + regulator-min-microvolt = <3300000>;
    > + regulator-max-microvolt = <3300000>;
    > + regulator-name = "vcc-eth-mmc";
    > + };
    > +
    > + sw {
    > + /* unused */
    > + };
    > + };
    > + };
    > +};
    > +
    > +&uart0 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&uart0_ph_pins>;
    > + status = "okay";
    > +};
    > +
    > +&usbotg {
    > + dr_mode = "otg";
    > + status = "okay";
    > +};
    > +
    > +&usbphy {
    > + usb0_vbus-supply = <&reg_vcc5v>;
    > + usb1_vbus-supply = <&reg_usb1_vbus>;
    > + status = "okay";
    > +};
    > --
    > 2.17.5
    >
    > --
    > You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
    > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
    > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20201202135409.13683-9-andre.przywara%40arm.com.

    \
     
     \ /
      Last update: 2020-12-06 13:55    [W:4.419 / U:1.500 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site