Messages in this thread Patch in this message | | | From | Serge Semin <> | Subject | [PATCH v5 04/19] dt-bindings: usb: Add "ulpi/serial/hsic" PHY types | Date | Sat, 5 Dec 2020 18:24:11 +0300 |
| |
Aside from the UTMI+ there are also ULPI, Serial and HSIC PHY types that can be specified in the phy_type HCD property. Add them to the enumeration of the acceptable values.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org>
---
Changelog v2: - Grammar fix: "s/PHY types can be/PHY types that can be" - Drop quotes from around the string constants.
Changelog v4: - Move the new PHY types definitions into the usb.yaml schema where the phy_type property is now defined. --- Documentation/devicetree/bindings/usb/usb.yaml | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml index 991c02725e2b..6dc4821e63c3 100644 --- a/Documentation/devicetree/bindings/usb/usb.yaml +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -27,11 +27,13 @@ properties: phy_type: description: Tells USB controllers that we want to configure the core to support a - UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case - this isn't passed via DT, USB controllers should default to HW - capability. + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low + pin interface if ULPI is specified, Serial core/PHY interconnect if + serial is specified and High-Speed Inter-Chip feature if HSIC is + selected. In case this isn't passed via DT, USB controllers should + default to HW capability. $ref: /schemas/types.yaml#/definitions/string - enum: [utmi, utmi_wide] + enum: [utmi, utmi_wide, ulpi, serial, hsic] maximum-speed: description: -- 2.29.2
| |