Messages in this thread | | | From | Andy Shevchenko <> | Date | Thu, 3 Dec 2020 16:10:02 +0200 | Subject | Re: [PATCH v4 2/3] spi: Add SPI_NO_TX/RX support |
| |
On Thu, Dec 3, 2020 at 4:00 PM Alexandru Ardelean <alexandru.ardelean@analog.com> wrote: > From: Dragos Bogdan <dragos.bogdan@analog.com> > > Transmit/receive only is a valid SPI mode. For example, the MOSI/TX line > might be missing from an ADC while for a DAC the MISO/RX line may be > optional. This patch adds these two new modes: SPI_NO_TX and > SPI_NO_RX. This way, the drivers will be able to identify if any of > these two lines is missing and to adjust the transfers accordingly.
...
> + BUILD_BUG_ON(SPI_MODE_USER_MASK & SPI_MODE_KERNEL_MASK);
Please, use static_assert() as I have been pointed out. It may be located outside of a function scope. You may attach it directly to the definition of the KERNEL_MASK (I haven't tried yet with header though).
...
> +#define SPI_NO_TX BIT(31) /* no transmit wire */ > +#define SPI_NO_RX BIT(30) /* no receive wire */ > +#define SPI_MODE_KERNEL_MASK (SPI_NO_TX | SPI_NO_RX)
This needs a comment to explain what's going on with the flags (split).
-- With Best Regards, Andy Shevchenko
| |