lkml.org 
[lkml]   [2020]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 5/9] arm64: dts: renesas: beacon: Cleanup USB References
From
Date
On 24.12.2020 20:04, Adam Ford wrote:

> The programmable versaclock is used for the usb_extal reference clock for
> the EHCI driver instead of a fixed-clock. Because the versaclock needs to
> be enabled, the clock reference needs to be added to the clocks list.
>
> For the USB3 Phy, the perferred clock reference is usb3s_clk, so

PHY. Preferred.

> remove the usb_extal reference.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
[...]
> diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> index ade2f58ad99b..a6f7193e4d97 100644
> --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
[...]
> @@ -315,16 +306,12 @@ &sdhi3 {
> vmmc-supply = <&reg_3p3v>;
> vqmmc-supply = <&reg_1p8v>;
> bus-width = <8>;
> - mmc-hs200-1_8v;
> + mmc-hs400-1_8v;

Unrelated?

> non-removable;
> fixed-emmc-driver-type = <1>;
> status = "okay";
> };
[...]

MBR, Sergei

\
 
 \ /
  Last update: 2020-12-25 10:12    [W:0.084 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site