Messages in this thread Patch in this message | | | Date | Wed, 23 Dec 2020 13:42:43 +0000 | From | Timon Baetz <> | Subject | [PATCH v4 2/7] regulator: dt-bindings: Document max8997-pmic nodes |
| |
Add maxim,max8997-battery and maxim,max8997-muic optional nodes.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> --- .../bindings/regulator/max8997-regulator.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt index 6fe825b8ac1b..faaf2bbf0272 100644 --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt @@ -53,6 +53,18 @@ Additional properties required if either of the optional properties are used: - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used for dvs. The format of the gpio specifier depends in the gpio controller. +Optional nodes: +- charger: Node for configuring the charger driver. + Required properties: + - compatible: "maxim,max8997-battery" + Optional properties: + - extcon: extcon specifier for charging events + - charger-supply: regulator node for charging current + +- muic: Node used only by extcon consumers. + Required properties: + - compatible: "maxim,max8997-muic" + Regulators: The regulators of max8997 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this sub-node should be of the format as listed below. -- 2.25.1
| |