lkml.org 
[lkml]   [2020]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: xen/evtchn: Interrupt for port 34, but apparently not enabled; per-user 00000000a86a4c1b on 5.10
From
Date
Hi Juergen,

On 15/12/2020 10:20, Jürgen Groß wrote:
> On 15.12.20 08:27, Jürgen Groß wrote:
>> On 14.12.20 22:25, Julien Grall wrote:
>>> Hi Juergen,
>>>
>>> When testing Linux 5.10 dom0, I could reliably hit the following
>>> warning with using event 2L ABI:
>>>
>>> [  589.591737] Interrupt for port 34, but apparently not enabled;
>>> per-user 00000000a86a4c1b
>>> [  589.593259] WARNING: CPU: 0 PID: 1111 at
>>> /home/ANT.AMAZON.COM/jgrall/works/oss/linux/drivers/xen/evtchn.c:170
>>> evtchn_interrupt+0xeb/0x100
>>> [  589.595514] Modules linked in:
>>> [  589.596145] CPU: 0 PID: 1111 Comm: qemu-system-i38 Tainted: G
>>> W         5.10.0+ #180
>>> [  589.597708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
>>> BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
>>> [  589.599782] RIP: e030:evtchn_interrupt+0xeb/0x100
>>> [  589.600698] Code: 48 8d bb d8 01 00 00 ba 01 00 00 00 be 1d 00 00
>>> 00 e8 d9 10 ca ff eb b2 8b 75 20 48 89 da 48 c7 c7 a8 31 3d 82 e8 65
>>> 29 a0 ff <0f> 0b e9 42 ff ff ff 0f 1f 40 00 66 2e 0f 1f 84 00 00 00
>>> 00 00 0f
>>> [  589.604087] RSP: e02b:ffffc90040003e70 EFLAGS: 00010086
>>> [  589.605102] RAX: 0000000000000000 RBX: ffff888102091800 RCX:
>>> 0000000000000027
>>> [  589.606445] RDX: 0000000000000000 RSI: ffff88817fe19150 RDI:
>>> ffff88817fe19158
>>> [  589.607790] RBP: ffff88810f5ab980 R08: 0000000000000001 R09:
>>> 0000000000328980
>>> [  589.609134] R10: 0000000000000000 R11: ffffc90040003c70 R12:
>>> ffff888107fd3c00
>>> [  589.610484] R13: ffffc90040003ed4 R14: 0000000000000000 R15:
>>> ffff88810f5ffd80
>>> [  589.611828] FS:  00007f960c4b8ac0(0000) GS:ffff88817fe00000(0000)
>>> knlGS:0000000000000000
>>> [  589.613348] CS:  10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
>>> [  589.614525] CR2: 00007f17ee72e000 CR3: 000000010f5b6000 CR4:
>>> 0000000000050660
>>> [  589.615874] Call Trace:
>>> [  589.616402]  <IRQ>
>>> [  589.616855]  __handle_irq_event_percpu+0x4e/0x2c0
>>> [  589.617784]  handle_irq_event_percpu+0x30/0x80
>>> [  589.618660]  handle_irq_event+0x3a/0x60
>>> [  589.619428]  handle_edge_irq+0x9b/0x1f0
>>> [  589.620209]  generic_handle_irq+0x4f/0x60
>>> [  589.621008]  evtchn_2l_handle_events+0x160/0x280
>>> [  589.621913]  __xen_evtchn_do_upcall+0x66/0xb0
>>> [  589.622767]  __xen_pv_evtchn_do_upcall+0x11/0x20
>>> [  589.623665]  asm_call_irq_on_stack+0x12/0x20
>>> [  589.624511]  </IRQ>
>>> [  589.624978]  xen_pv_evtchn_do_upcall+0x77/0xf0
>>> [  589.625848]  exc_xen_hypervisor_callback+0x8/0x10
>>>
>>> This can be reproduced when creating/destroying guest in a loop.
>>> Although, I have struggled to reproduce it on a vanilla Xen.
>>>
>>> After several hours of debugging, I think I have found the root cause.
>>>
>>> While we only expect the unmask to happen when the event channel is
>>> EOIed, there is an unmask happening as part of handle_edge_irq()
>>> because the interrupt was seen as pending by another vCPU
>>> (IRQS_PENDING is set).
>>>
>>> It turns out that the event channel is set for multiple vCPU is in
>>> cpu_evtchn_mask. This is happening because the affinity is not
>>> cleared when freeing an event channel.
>>>
>>> The implementation of evtchn_2l_handle_events() will look for all the
>>> active interrupts for the current vCPU and later on clear the pending
>>> bit (via the ack() callback). IOW, I believe, this is not an atomic
>>> operation.
>>>
>>> Even if Xen will notify the event to a single vCPU,
>>> evtchn_pending_sel may still be set on the other vCPU (thanks to a
>>> different event channel). Therefore, there is a chance that two vCPUs
>>> will try to handle the same interrupt.
>>>
>>> The IRQ handler handle_edge_irq() is able to deal with that and will
>>> mask/unmask the interrupt. This will mess us with the lateeoi logic
>>> (although, I managed to reproduce it once without XSA-332).
>>
>> Thanks for the analysis!
>>
>>> My initial idea to fix the problem was to switch the affinity from
>>> CPU X to CPU0 when the event channel is freed.
>>>
>>> However, I am not sure this is enough because I haven't found
>>> anything yet preventing a race between evtchn_2l_handle_events9) and
>>> evtchn_2l_bind_vcpu().
>>>
>>> So maybe we want to introduce a refcounting (if there is nothing
>>> provided by the IRQ framework) and only unmask when the counter drop
>>> to 0.
>>>
>>> Any opinions?
>>
>> I think we don't need a refcount, but just the internal states "masked"
>> and "eoi_pending" and unmask only if both are false. "masked" will be
>> set when the event is being masked. When delivering a lateeoi irq
>> "eoi_pending" will be set and "masked "reset. "masked" will be reset
>> when a normal unmask is happening. And "eoi_pending" will be reset
>> when a lateeoi is signaled. Any reset of "masked" and "eoi_pending"
>> will check the other flag and do an unmask if both are false.
>>
>> I'll write a patch.
>
> Julien, could you please test the attached (only build tested) patch?

I can boot dom0 and a guest. However, if I destroy the guest and create
a new one, I will get hundreds of WARN() similar to the one I originally
reported and the guest wouldn't boot.

The same issue can now be reproduced on a vanilla Xen 4.15 and Linux
5.10 (no change expect your patch). I haven't looked at the code but it
looks like to me the interrupt state is getting de-synchronized when
re-used.

I also got the below splat once, so I am not entirely sure if this is
related:

[ 86.134903] ------------[ cut here ]------------
[ 86.135950] WARNING: CPU: 0 PID: 904 at linux/kernel/softirq.c:175
__local_bh_enable_ip+0x9a/0xd0
[ 86.138232] Modules linked in:
[ 86.138937] CPU: 0 PID: 904 Comm: xenstored Not tainted 5.10.0+ #183
[ 86.140162] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 86.142221] RIP: e030:__local_bh_enable_ip+0x9a/0xd0
[ 86.143204] Code: 00 ff ff 00 74 3e 65 ff 0d 63 fa f2 7e e8 0e 15 13
00 e8 59 55 f4 ff 66 90 48 83 c4 08 5b c3 65 8b 05 46 0a f3 7e 85 c0 75
99 <0f> 0b eb 95 48 89 3c 24 e8 93
[ 86.146587] RSP: e02b:ffffc90040003ad0 EFLAGS: 00010246
[ 86.147632] RAX: 0000000000000000 RBX: 0000000000000200 RCX:
ffffe8ffffc05000
[ 86.148986] RDX: 00000000000000f7 RSI: 0000000000000200 RDI:
ffffffff81a4e9c3
[ 86.150354] RBP: ffff8881003124b0 R08: 0000000000000001 R09:
0000000000000000
[ 86.151722] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff88810d150600
[ 86.153078] R13: ffff88810d2b3f8e R14: ffff8881030b0000 R15:
ffffc90040003c10
[ 86.154422] FS: 00007f39a12f5240(0000) GS:ffff88817fe00000(0000)
knlGS:0000000000000000
[ 86.155958] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 86.157063] CR2: 00007f0754002858 CR3: 000000010e13a000 CR4:
0000000000050660
[ 86.158409] Call Trace:
[ 86.158959] <IRQ>
[ 86.159425] ? __local_bh_disable_ip+0x4b/0x60
[ 86.160329] ipt_do_table+0x36f/0x660
[ 86.161079] ? lock_acquire+0x252/0x3a0
[ 86.161846] ? ip_local_deliver+0x70/0x200
[ 86.162664] nf_hook_slow+0x43/0xb0
[ 86.163398] ip_local_deliver+0x15b/0x200
[ 86.164200] ? ip_protocol_deliver_rcu+0x270/0x270
[ 86.165146] ip_rcv+0x13a/0x210
[ 86.165794] ? __lock_acquire+0x2e2/0x1a30
[ 86.166610] ? lock_is_held_type+0xe9/0x110
[ 86.167477] __netif_receive_skb_core+0x414/0xf60
[ 86.168468] ? find_held_lock+0x2d/0x90
[ 86.169279] ? __netif_receive_skb_list_core+0x134/0x2d0
[ 86.170353] __netif_receive_skb_list_core+0x134/0x2d0
[ 86.171373] netif_receive_skb_list_internal+0x1ef/0x3c0
[ 86.172402] ? e1000_clean_rx_irq+0x338/0x3d0
[ 86.173285] gro_normal_list.part.149+0x19/0x40
[ 86.174171] napi_complete_done+0xf3/0x1a0
[ 86.175013] e1000e_poll+0xc9/0x2b0
[ 86.175738] net_rx_action+0x176/0x4e0
[ 86.176500] __do_softirq+0xd4/0x432
[ 86.177230] irq_exit_rcu+0xbc/0xc0
[ 86.177946] asm_call_irq_on_stack+0xf/0x20
[ 86.178780] </IRQ>
[ 86.179267] xen_pv_evtchn_do_upcall+0x77/0xf0
[ 86.180169] exc_xen_hypervisor_callback+0x8/0x10
[ 86.181098] RIP: e030:xen_hypercall_domctl+0xa/0x20
[ 86.182055] Code: 51 41 53 b8 23 00 00 00 0f 05 41 5b 59 c3 cc cc cc
cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 24 00 00 00 0f
05 <41> 5b 59 c3 cc cc cc cc cc cc
[ 86.185490] RSP: e02b:ffffc900407dbe18 EFLAGS: 00000282
[ 86.186563] RAX: 0000000000000000 RBX: ffff888104f7b000 RCX:
ffffffff8100248a
[ 86.187973] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
deadbeefdeadf00d
[ 86.189381] RBP: ffffffffffffffff R08: 0000000000000000 R09:
0000000000000000
[ 86.190753] R10: 0000000000000000 R11: 0000000000000282 R12:
0000000000305000
[ 86.192113] R13: 00007ffdc8d6a5a0 R14: 0000000000000008 R15:
0000000000000000
[ 86.193473] ? xen_hypercall_domctl+0xa/0x20
[ 86.194324] ? privcmd_ioctl+0x179/0xa80
[ 86.195131] ? common_file_perm+0x84/0x2c0
[ 86.195956] ? __x64_sys_ioctl+0x8e/0xd0
[ 86.196744] ? lockdep_hardirqs_on+0x4d/0xf0
[ 86.197598] ? do_syscall_64+0x33/0x80
[ 86.198347] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 86.199402] irq event stamp: 39806070
[ 86.200168] hardirqs last enabled at (39806078):
[<ffffffff8116c714>] console_unlock+0x4b4/0x5b0
[ 86.201832] hardirqs last disabled at (39806085):
[<ffffffff8116c670>] console_unlock+0x410/0x5b0
[ 86.203508] softirqs last enabled at (39685022):
[<ffffffff81e0030f>] __do_softirq+0x30f/0x432
[ 86.205140] softirqs last disabled at (39805575):
[<ffffffff810e857c>] irq_exit_rcu+0xbc/0xc0
[ 86.206739] ---[ end trace 178144c74d23e738 ]---

Cheers,

--
Julien Grall

\
 
 \ /
  Last update: 2020-12-23 13:14    [W:0.051 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site