lkml.org 
[lkml]   [2020]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
On Wed, Dec 23, 2020 at 04:33:41PM +0530, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
>
> i.Core MX8M Mini needs to mount on top of this Carrier board for
> creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
>
> Add support for it.
>
> Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - don't maintain common nodes and include it, if no feature diff
> Changes for v2:
> - enabled fec1 node
> - updated commit message
> - dropped engicam from filename since it aligned with imx6 engicam
> dts files naming conventions.
> - add i2c nodes
> - fixed v1 comments
>
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mm-engicam-ctouch2.dtsi | 82 +++++++++++++++++++
> .../freescale/imx8mm-icore-mx8mm-ctouch2.dts | 21 +++++
> 3 files changed, 104 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi

You split some common part to ctouch2.dtsi so it can be reused in
multiple places. I saw so far only one usage, where are the others?

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-12-23 13:01    [W:0.074 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site