lkml.org 
[lkml]   [2020]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] rtc: pcf2127: only use watchdog when explicitly available
Date
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Most boards using the pcf2127 chip (in my bubble) don't make use of the
watchdog functionality and the respective output is not connected. The
effect on such a board is that there is a watchdog device provided that
doesn't work.

So only register the watchdog if the device tree has a "reset-source"
property.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[RV: s/has-watchdog/reset-source/]
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/rtc/rtc-pcf2127.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 33fa8b17b79c..39a7b5116aa4 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -336,7 +336,8 @@ static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
u32 wdd_timeout;
int ret;

- if (!IS_ENABLED(CONFIG_WATCHDOG))
+ if (!IS_ENABLED(CONFIG_WATCHDOG) ||
+ !device_property_read_bool(dev, "reset-source"))
return 0;

pcf2127->wdd.parent = dev;
--
2.23.0
\
 
 \ /
  Last update: 2020-12-18 11:12    [W:0.154 / U:2.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site