lkml.org 
[lkml]   [2020]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm
From
Date
Hi Guido,

this time hopefully with less broken quoting. My mailer is driving me
mad right now...

Am Mittwoch, dem 16.12.2020 um 12:27 +0100 schrieb Guido Günther:
> This allows us to shut down the mipi power domain on the imx8. The
> alternative would be to drop the dphy from the mipi power domain in the
> SOCs device tree and only have the DSI host controller visible there but
> since the PD is mostly about the PHY that would defeat it's purpose.

Adding RPM support is exactly the right course of action.

> This allows to shut off the power domain hen blanking the LCD panel:
>
> pm_genpd_summary before:
>
> domain status slaves
>     /device runtime status
> ----------------------------------------------------------------------
> mipi on
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy unsupported
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi suspended
>
> after:
>
> mipi off-0
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy suspended
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi suspended
>
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
> ---
>  .../phy/freescale/phy-fsl-imx8-mipi-dphy.c | 22 ++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
> index a95572b397ca..34e2d801e520 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
> @@ -14,6 +14,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/regmap.h>
>  
>  /* DPHY registers */
> @@ -93,6 +94,7 @@ struct mixel_dphy_cfg {
>  };
>  
>  struct mixel_dphy_priv {
> + struct device *dev;
>   struct mixel_dphy_cfg cfg;
>   struct regmap *regmap;
>   struct clk *phy_ref_clk;
> @@ -382,6 +384,7 @@ static int mixel_dphy_power_on(struct phy *phy)
>   ret = clk_prepare_enable(priv->phy_ref_clk);
>   if (ret < 0)
>   return ret;
> + pm_runtime_get_sync(priv->dev);
>  

This call can fail and will leave you with an elevated rpm refcount.
Better use the new pm_runtime_resume_and_get to avoid this issue?

Nitpick: I would add a blank line before the call.

Regards,
Lucas

\
 
 \ /
  Last update: 2020-12-16 13:07    [W:0.066 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site